4M-1751-005w_G5S.pdf - 第79页
4OM-1751 1-29 1304-001 4.5 Feeder Cart Section NOTICE Do not blow air to cleaning sections with an air gun. When the air is blown, dirt or dust inside the machine will disperse,which may adhere to the sensors, control bo…
4OM-1751
1-281304-001
4.4 Feeder Base Driving Section
4.4.1 Worm Gears (2 locations) Lubrication
Worm Gears
(2 locations)
Every 3 Months Lubrication
(MOLYNOC GREASE AP1)
Required Time: 2 minutes
Use No. 19 (brown) nozzle.
Note
No. 19
Apply a small amount of new grease to the
worm gears with a syringe.
F4A20
4.4 Feeder Base Driving Section
4OM-1751
1-291304-001
4.5 Feeder Cart Section
NOTICE
Do not blow air to cleaning sections with an air gun.
When the air is blown, dirt or dust inside the machine
will disperse,which may adhere to the sensors,
control boards and moving mechanisms causing
machine failures.
Groove on Feeder Base
Every Week Cleaning
Required Time:2minutes
Suck dirt and dust withavacuum cleaner.
Upper Surface of Feeder Base
Every Day Cleaning
Required Time:2minutes
Remove foreign substances and unrequired
components withavacuum cleaner and
wipe off dirt and dust witharag.
F4A21
4.5 Feeder Cart Section
4OM-1751
1-301304-001
Scrap Box
Every Day Cleaning
Required Time:1minute
When the scrap box is filled with the tape with
no components, draw the scrap box out and
remove such tape.
Reel Box
Every Day Cleaning
Required Time:5minutes
Clean the dust and debris at the bottom of the
reel box using a vacuum cleaner, or open the
cover and drop any dust and debris into the
scrap box.
F4A22
4.5 Feeder Cart Section