00198521-01_UM_LDU_E_EN.pdf - 第61页

5 Cleaning 5.2 Removing the parts to be cleaned User Manual SIPLACE Linear Dipping Unit E 12/2018 61 (1) The LDU moves the squeegee over the dip plate. (2) The lift axis is lowered and the flux tank is released. (3) The …

5 Cleaning

5.2 Removing the parts to be cleaned

60 User Manual SIPLACE Linear Dipping Unit E 12/2018

5.2 Removing the parts to be cleaned

NOTICE

Observe the exact order

It is important to perform the steps for removal of the parts to be cleaned in the sequence

described here.

► In the station software, select the Setup

view(1) and then the Locations area (2).

► Select the Table (3) on which the LDU is

set up.

► Select the icon of the LDU(1).

► Click on the Settings... button (2).

► Select the Cleaning tab.

Releasing the flux tank

Prerequisites: Park plate and dip plate are fitted.

► Click on the Unhook flux tank button.

5 Cleaning

5.2 Removing the parts to be cleaned

User Manual SIPLACE Linear Dipping Unit E 12/2018 61

(1) The LDU moves the squeegee over the dip

plate.

(2) The lift axis is lowered and the flux tank is

released.

(3) The LDU moves the squeegee slightly back

over the park plate.

► Make sure that the flux tank is completely

released.

Removing the flux tank and the dip plate

Prerequisites: The park plate and the dip plate are fitted.

► Click on the Remove dip plate button.

(1) The LDU moves the squeegee back over the

park plate and the dip plate with the flux tank is

lifted.

(2) Rotate the flux tank on the dip plate by ap-

prox. 90°.

(3) Remove the dip plate together with the flux

tank.

NOTICE

Avoid leakage of flux

When removing the flux tank and the dip plate leave the flux tank on the dip plate so that

remaining flux cannot leak out of the flux tank and contaminate the LDU. The removal is

easier when you rotate the flux tank on the dip plate by approx. 90° without lifting it.

5 Cleaning

5.2 Removing the parts to be cleaned

62 User Manual SIPLACE Linear Dipping Unit E 12/2018

Removing the park plate and the drip tray

Prerequisites: The park plate and drip tray are fitted. The dip plate is removed.

► Click on the Remove drip tray and park

plate button.

(1) The LDU moves the lift axis backwards and

the squeegee to the front.

(2) Remove the park plate.

► Remove the drip tray.