OM-1670-001_w.pdf - 第15页
OM-1670 12 8. Maintenance 8.1 Precautionary Items before Maintenance This session describes how to perform inspections, cleaning, lubrication, and adjustment to keep the nozzle stocker for multi-functional nozzle in good…
OM-1670
11
7. "Unit Adj." Submenu
7.1 "NOZ.CHNG." Window
The nozzle attachment and housing can be performed manually.
Note
The display in the window varies depending on the selected option.
Fig. 7 Condition where the Nozzle Stocker "L3" for
Multi-Functional Nozzles has been attached.
Reference
Refer to "4.1. "NOZ.CHG." Window" in Chapter 1 (Volume 3) in the
SIGMA-G4/G5 Main Machine Instruction Manual for the details of the "NOZ.
CHG." window.
Graphic
Development
1011-001
7. "Unit Adj." Submenu
OM-1670
12
8. Maintenance
8.1 Precautionary Items before Maintenance
This session describes how to perform inspections, cleaning, lubrication, and
adjustment to keep the nozzle stocker for multi-functional nozzle in good shape.
It is recommended that periodic maintenance of the nozzle stocker for multi-
functional nozzle should be ensured.
CAUTION
Only a well-trained service person should perform
maintenance tasks carefully through the specied
procedures.
8.2 Preparation for Maintenance
8.2.1 Preparation for Cleaning
Required Items for Cleaning and Lubrication
•
Oiled Rag
Use a rag made of such material as cotton, etc., that produces as less waste
thread as possible.
Too much grease should not be applied and any different type of grease should
not be mixed into the specied one.
Notice
The remaining waste thread if any will cause the machine to break down.
•
Vacuum Cleaner
If the suction hole of the vacuum cleaner is changed to a smaller one, some
spots can be cleaned more easily.
1011-001
8. Maintenance
OM-1670
13
8.2.2 Preparation for Lubrication
Prepare for the specied types of grease and lubrication tools.
Specied Greases
• DAPHNE EPONEX GREASE No. 1 (IDEMITSU KOSAN)
• MOL
YNOC GREASE AP1 (NIPPON OIL CORPORATION)
Note
Before lubrication, wipe off old grease. Otherwise, the effect of grease and oil
will decrease.
Same Types of Lubricants
•
Grease Types equivalent to DAPHNE EPONEX GREASE No. 1 (IDEMITSU
KOSAN)
Table 1
Grease Names Makers
Alvania Grease No. 1 Showa Shell Sekiyu K.K
Multinoc Grease 1 NIPPON OIL CORPORATION
Jomo Lisonix Grease No. 1 JAPAN ENERGY CORPORATION
Dynamax No. 1 COSMO OIL LUBRICANTS
Lithtan 1 ESSO OIL
MP Grease No. 1 KYGNUS
Gemico MP-1 Tonen General Sekiyu K.K
Multemp PS1 KYODOH YUSHI CO., LTD.
•
Grease
Types equivalent to MOLYNOC GREASE
AP1 (NIPPON OIL
CORPORATION)
Table 2
Grease Names Makers
DAPHINE Grease M No. 1 Idemitsu Kosan Co., Ltd.
Jomo Lisonix Grease M No. 1 JAPAN ENERGY CORPORATION
COSMO MOLYBDEN GREASE
No. 1
COSMO OIL LUBRICANTS
BEACON Q2 ESSO OIL
Gemico MD2 Tonen General Sekiyu K.K
M
5 GREASE 1 KYGNUS
1011-001
8.2 Preparation for Maintenance