OM-1670-001_w.pdf - 第21页
OM-1670 18 Cam Follower Every Month Cleaning and Lubrication (MOLYNOC GREASE AP1) Shutter Flange Pin Sliding Section Every 3 Months Cleaning and Lubrication (MOLYNOC GREASE AP1) Required Time: 5 minutes (1) Wipe off old …
OM-1670
17
8.4.2 Nozzle Stocker for Multi-Functional Nozzle
Nozzle Storage Section
Every Month Cleaning
Suck dirt and dust with a vacuum cleaner.
Nozzle Stocker Sliding Section
Every 3 Months Cleaning and Lubrication
(DAPHNE EPONEX GREASE No. 1)
Required Time: 5 minutes
(1) Wipe off old grease with an oiled rag.
(2) Apply new grease with a syringe.
Use No. 19 (brown) nozzle.
No.19
Note
Fig. 10
1011-001
8.4 Maintenance Method
OM-1670
18
Cam Follower
Every Month Cleaning and Lubrication
(MOLYNOC GREASE AP1)
Shutter Flange Pin Sliding Section
Every 3 Months Cleaning and Lubrication
(MOLYNOC GREASE AP1)
Required Time: 5 minutes
(1) Wipe off old grease with an oiled rag.
(2) Apply new grease with a syringe.
(1) Wipe off old grease with an oiled rag.
(2) Apply new grease by hand or with a
syringe.
Use No. 19 (brown) nozzle.
No.19
Note
Take ample care not to leave
the waste threads after the
old grease is wiped off.
Note
Shutter Flange Pin Sliding Section
Every 3 Months Cleaning and Lubrication
(MOLYNOC GREASE AP1)
Required Time: 5 minutes
(1) Wipe off old grease with an oiled rag.
(2) Apply new grease with a syringe.
Use No. 19 (brown) nozzle.
No.19
Note
Fig. 11
1011-001
8.4 Maintenance Method
OM-1670
19
9. Troubleshooting
9.1 Starting Guidance
Reference
Refer to "Troubleshooting" in "Chapter 2" of the instruction manual (Vol. 4) for
the main machine for details.
9.2 Error IDs and Remedial Procedures
Reference
Refer to "Troubleshooting based Error ID" in "Chapter 3" of the instruction
manual (Vol. 4) for the main machine for details.
1011-001
9. Troubleshooting