OM-1670-001_w.pdf - 第22页

OM-1670 19 9. T roubleshooting 9.1 Starting Guidance Reference Refer to "T roubleshooting" in "Chapter 2" of the instruction manual (V ol. 4) for the main machine for details. 9.2 Error IDs and Remedi…

100%1 / 25
OM-1670
18
Cam Follower
Every Month Cleaning and Lubrication
(MOLYNOC GREASE AP1)
Shutter Flange Pin Sliding Section
Every 3 Months Cleaning and Lubrication
(MOLYNOC GREASE AP1)
Required Time: 5 minutes
(1) Wipe off old grease with an oiled rag.
(2) Apply new grease with a syringe.
(1) Wipe off old grease with an oiled rag.
(2) Apply new grease by hand or with a
syringe.
Use No. 19 (brown) nozzle.
No.19
Note
Take ample care not to leave
the waste threads after the
old grease is wiped off.
Note
Shutter Flange Pin Sliding Section
Every 3 Months Cleaning and Lubrication
(MOLYNOC GREASE AP1)
Required Time: 5 minutes
(1) Wipe off old grease with an oiled rag.
(2) Apply new grease with a syringe.
Use No. 19 (brown) nozzle.
No.19
Note
Fig. 11
1011-001
8.4 Maintenance Method
OM-1670
19
9. Troubleshooting
9.1 Starting Guidance
Reference
Refer to "Troubleshooting" in "Chapter 2" of the instruction manual (Vol. 4) for
the main machine for details.
9.2 Error IDs and Remedial Procedures
Reference
Refer to "Troubleshooting based Error ID" in "Chapter 3" of the instruction
manual (Vol. 4) for the main machine for details.
1011-001
9. Troubleshooting
OM-1670
201011-001
10. Specications
Table 6
noitpircseDmetI
1. Model GS-NM100/101/102/103
2. Applicable
Model
SIGMA-G4/G5
3. Configuration Nozzle Stocker for Multi-Functional Nozzle (GS-NM100/101/102/103)
• This consists of the change section and the cylinder section as a set.
Change Section of the Nozzle Stocker for Multi-Functional Nozzle (G -S003-
09/GS-NM111/112/113)
• Shortening the pattern program change time without any nozzle offline
setup
• Prevention of nozzle missing
Cylinder Section of the Nozzle Stocker for Multi-Functional Nozzle (GS-
NM120)
• Change section of the nozzle stocker for multi-functional nozzle in
SIGMA-G4/G5, with which the nozzle stocker (G -S003-09/GS-
NM111/112/113) can be installed on the unit base.
4. Applicable
Nozzle
• FA, FC, FE, FF, FY, WC, WE, WF, WG, WH, WN, WS, WT, YA, YF, YX
Series
• FR Series
Note : The FR series has been designed specially for GS-NM101/102/103.
5. Number of
Stockable
Nozzles
GS-NM100 : Max. 9 nozzles
GS-NM101 : Max. 7 nozzles
GS-NM102 : Max. 5 nozzles
GS-NM103 : Max. 3 nozzles
10. Specications