OM-1670-001_w.pdf - 第7页

OM-1670 4 101 1-001 1. Scope 1. Scope This mechanism is used to house the multi-functional nozzles. The placement head is moved to the position above the nozzle stocker according to the pattern program and the selected n…

100%1 / 25
OM-1670
3
Contents
Page
1011-001
Before Use ............................................................................................ 1
Contents ............................................................................................. 3
1. Scope ............................................................................................. 4
2. Rought View of Machine ................................................................ 5
3. Nozzle Stocker for Multi-Functional Nozzle Setup Procedure ....... 6
4.
Pattern Program ............................................................................. 7
4.1 Nozzle Stk 1, 2 data ................................................................ 7
5. "NOZ.CHG." Window ..................................................................... 9
6. "Unit Change" Window ................................................................... 10
6.1 Nozzle Stocker ........................................................................ 10
7. "Unit Adj." Submenu ....................................................................... 11
7.1 "NOZ.CHNG." Window
........................................................... 11
8. Maintenance ................................................................................... 12
8.1 Precautionary Items before Maintenance ............................... 12
8.2 Preparation for Maintenance .................................................. 12
8.2.1 Preparation for Cleaning ................................................ 12
8.2.2 Preparation for Lubrication ............................................ 13
8.3 Maintenance Cheak List ......................................................... 15
8.3.1 Monthly Maintenance .................................................... 15
8.3.2 Quarterly Maintenance .................................................. 15
8.4 Maintenance Method .............................................................. 16
8.4.1 Understanding of Maintenance Items
on Each Section .......... 1
6
8.4.2 Nozzle Stocker for Multi-Functional Nozzle ................... 17
9. Troubleshooting .............................................................................. 19
9.1 Starting Guidance ................................................................... 19
9.2 Error IDs and Remedial Procedures ....................................... 19
10. Specications ................................................................................. 20
OM-1670
41011-001
1. Scope
1. Scope
This mechanism is used to house the multi-functional nozzles.
The placement head is moved to the position above the nozzle stocker according
to the pattern program and the selected nozzle is attached or removed.
Adding the nozzle stocker for multi-functional nozzle, on the unit base, enables
the operator to change the pattern program without any ofine setup.
OM-1670
5
2. Rought View of Machine
Change Section of the Nozzle
Stocker for Multi-Functional Nozzle
(G -S003-09) Note b
Cylinder Section of the Nozzle
Stocker for Multi-Functional Nozzle
(GS-NM120) Note b
Nozzle Stocker for
Multi-Functional Nozzle
Unit Base
Fig. 1 Nozzle Stocker for Multi-Functional Nozzle
Notice
(a) Do not put any foreign object in the nozzle stocker section.
Otherwise, the machine will break down.
(b) Do not bring any magnetized object such as a magnet close to the
vacuum nozzles.
Otherwise, an error may occur during component picks and
placement.
(c) The cylinder section of the nozzle stocker for multi-functional nozzle,
is applicable to any unit of the change sections of the nozzle stocker
for multi-functional nozzle (G -S003-09/GS-NM111/1
12/113).
1011-001
2. Rought View of Machine