OM-1670-001_w.pdf - 第8页

OM-1670 5 2. Rought V iew of Machine Change Se ction of the Nozzle Stocker for Multi-Fu nctional Nozzl e (G -S00 3-09) Note b Cylinder Sect ion of the Nozzle Stocker for Multi-Functional No zzle (GS-NM120) Note b Nozzle …

OM-1670

41011-001

1. Scope

This mechanism is used to house the multi-functional nozzles.

The placement head is moved to the position above the nozzle stocker according

to the pattern program and the selected nozzle is attached or removed.

Adding the nozzle stocker for multi-functional nozzle, on the unit base, enables

the operator to change the pattern program without any ofine setup.

OM-1670

2. Rought View of Machine

Change Section of the Nozzle

Stocker for Multi-Functional Nozzle

(G -S003-09) Note b

Cylinder Section of the Nozzle

Stocker for Multi-Functional Nozzle

(GS-NM120) Note b

Nozzle Stocker for

Multi-Functional Nozzle

Unit Base

Fig. 1 Nozzle Stocker for Multi-Functional Nozzle

Notice

(a) Do not put any foreign object in the nozzle stocker section.

Otherwise, the machine will break down.

(b) Do not bring any magnetized object such as a magnet close to the

vacuum nozzles.

Otherwise, an error may occur during component picks and

placement.

is applicable to any unit of the change sections of the nozzle stocker

for multi-functional nozzle (G -S003-09/GS-NM111/1

12/113).

1011-001

2. Rought View of Machine

OM-1670

3. Nozzle Stocker for Multi-Functional Nozzle Setup

Procedure

Pattern Program Setting

Nozzle Change Setting

Unit Change Setting

Automatic Operation

Unit Adjustment Setting

Set the pattern program.

Refer to "4. Pattern Program" for details.

Refer to "5. "NOZ. CHG." window" for details.

Refer to "6. "Unit Change" window" for details.

Refer to "7. "Unit Adj." Submenu" for details.

Set the nozzle change.

Set the unit change.

Set the unit adjustment.

Reference

Fig. 2

1011-001

3. Nozzle Stocker for Multi-Functional Nozzle Setup Procedure