4OM-1075-002.pdf - 第157页
Error ID Item Description 1 10107 T V # 1 Axis Origin Zeroing not completed within specified time. (5204) 1 10108 T V # 1 Axis Origin Pallet installation error detected.;BPH504/505 (5401) 1 10109 T V # 1 Axis Origin Pall…
Error ID Item Description
100301 Conveyor R Axis
100401 Conveyor R Axis
100402 Conveyor R Axis
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
100601 Conveyor R Axis Interlock Driver Alarm
100602 Conveyor R Axis Interlock
100603 Conveyor R Axis Interlock
100604 Conveyor R Axis Interlock
100605 Conveyor R Axis Interlock
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
110101 TV #1 Axis Origin Rack shutter not opened within specified time. (5101)
110102 TV #1 Axis Origin Pallet chuck not closed within specified time. (5102)
110103 TV #1 Axis Origin Operatiing condition for zeroing not fulfilled. (5103)
110104 TV #1 Axis Origin Pallet installation error detected; BPH504/505 (5201)
110105 TV #1 Axis Origin Pallet detected. (5202)
110106 TV #1 Axis Origin Operation not completed normally. (5203)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0206-002 2-65 AHB01ETRP
Error ID Item Description
110107 TV #1 Axis Origin Zeroing not completed within specified time. (5204)
110108 TV #1 Axis Origin Pallet installation error detected.;BPH504/505 (5401)
110109 TV #1 Axis Origin Pallet detected. (5402)
11010a TV #1 Axis Origin Operation not completed normally. (5403)
11010b TV #1 Axis Origin Zeroing not completed within specified time. (5404)
11010c TV #1 Axis Origin Pallet not detected. (5501)
11010d TV #1 Axis Origin Pallet installation error not detected within specified
time. (5502)
11010e TV #1 Axis Origin Pallet installation error detected before destination.
(5601)
11010f TV #1 Axis Origin Pallet not detected. (5701)
110110 TV #1 Axis Origin Operation not completed normally. (5702)
110111 TV #1 Axis Origin Operation not completed within specified time. (5703)
110114 TV #1 Axis Origin Rack shutter not closed within specified time. (5704)
110115 TV #1 Axis Origin Origin detected after end of zeroing operation.
(BPH511) (5901)
110117 TV #1 Axis Origin Operation not completed normally. (5902)
110118 TV #1 Axis Origin The limit sensors (BPH513) detected the limit. (5903)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
110201 TV #1 Axis Timing
110301 TV #1 Axis Data
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0206-002 2-66 AHB01ETRP
Error ID Item Description
110401 TV #1 Axis Limit
110402 TV #1 Axis Limit
(Cause 1) The X1 axis might have overrun due to generation of noises, overcurrent, etc.
The sensor may be defective.
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
110601 TV #1 Axis Interlock Driver Alarm
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service per-
sonnel for the remedy.
110602 TV #1 Axis Interlock Pick-Up Error Detection (Upper, 16.5 mm or more);
BPH518
110603 TV #1 Axis Interlock Pick-Up Error Detection (Lower, 8.0 mm or more);
BPH517
(Cause 1) See the explanation.
(Remedy 1) Remove the mispicked component on the tray.
110604 TV #1 Axis Interlock Pass-line Interlock
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0308-004 2-67 AHB01ETRP