4OM-1075-002.pdf - 第170页
Error ID Item Description 130201 Elevator #1 Axis Timing T ask has not been completed unable to continue. (Cause 1) Self-Diagnostics Error Message (Remedy 1) Zero all axes and re-start the operation. When the machine can…
Error ID Item Description
12f00e TV #2 Axis Operation Error
12f00f TV #2 Axis Operation Error
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
130101 Elevator #1 Axis Origin Encoder origin was not detected.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
130102 Elevator #1 Axis Origin Origin sensor (slide) was not detected.
130103 Elevator #1 Axis Origin Origin sensor (slide) and Limit error has been de-
tected.
(Cause 1) The backup U/D axis might have overrun due to a defective sensor, a broken cable,
generation of noises, or overcurrent.
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
130104 Elevator #1 Axis Origin Feedback value is indefinite.
130105 Elevator #1 Axis Origin Elevator #1 axis is not at origin.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0206-002 2-77 AHB01ETRP
Error ID Item Description
130201 Elevator #1 Axis Timing Task has not been completed unable to continue.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
130301 Elevator #1 Axis Data The driver data was detected outside of the possible
range.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
130401 Elevator #1 Axis Limit (+) Limit error has been detected.
130402 Elevator #1 Axis Limit (-) Limit error has been detected.
(Cause 1) The X1 axis might have overrun due to generation of noises, overcurrent, etc.
The sensor may be defective.
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
130502 Elevator #1 Axis Servo Alarm Parameter breakdown.
130503 Elevator #1 Axis Servo Alarm Main circuit encoder error.
130504 Elevator #1 Axis Servo Alarm Parameter setting error.
130505 Elevator #1 Axis Servo Alarm Combination error.
130510 Elevator #1 Axis Servo Alarm Overcurrent or heat sink overheated.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0206-002 2-78 AHB01ETRP
Error ID Item Description
130530 Elevator #1 Axis Servo Alarm Regenaration error detected.
130532 Elevator #1 Axis Servo Alarm Regenarative overload.
130540 Elevator #1 Axis Servo Alarm Overvoltage.
130541 Elevator #1 Axis Servo Alarm Undervoltage.
130551 Elevator #1 Axis Servo Alarm Overspeed.
130571 Elevator #1 Axis Servo Alarm Overload: High load.
130572 Elevator #1 Axis Servo Alarm Overload: Low load.
130573 Elevator #1 Axis Servo Alarm Dynamic brake overload.
130574 Elevator #1 Axis Servo Alarm Overload of surge current limit resistor.
13057a Elevator #1 Axis Servo Alarm Heat sink overheated.
130581 Elevator #1 Axis Servo Alarm Encoder backup error.
130582 Elevator #1 Axis Servo Alarm Encoder checksum error.
130583 Elevator #1 Axis Servo Alarm Absolute encoder battery error.
130584 Elevator #1 Axis Servo Alarm Encoder data error.
130585 Elevator #1 Axis Servo Alarm Encoder overspeed.
130586 Elevator #1 Axis Servo Alarm Encoder overheated.
130591 Elevator #1 Axis Servo Alarm Overload warning.
130592 Elevator #1 Axis Servo Alarm Regenerative overload warning.
130594 Elevator #1 Axis Servo Alarm Setting warning.
130595 Elevator #1 Axis Servo Alarm Command warning.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0206-002 2-79 AHB01ETRP