4OM-1075-002.pdf - 第238页

Error ID Item Description 701502 Tray 2 Elevator Change Positoin Change Position Movement Error (During Operation) Movement Error 701503 Tray 2 Elevator Change Positoin Movement Error (Cause 1) Self-Diagnostics Error Mes…

100%1 / 299
0206-001 2-1 13-13 AHB01ETRP
Error ID Item Description
701401 Tray 2 Pallet Drawout Error No Pallet at Start of Drawout Operation
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Check the condition of the pallet detection (BPH514).
701402 Tray 2 Pallet Drawout Error Traverse Chuck Position Movement Error (Before
Operation)
701403 Tray 2 Pallet Drawout Error Traverse Chuck Position Movement Error (During
Operation)
701404 Tray 2 Pallet Drawout Error Traverse Drawout Position Movement Error (Before
Operation)
701405 Tray 2 Pallet Drawout Error Traverse Drawout Position Movement Error (During
Operation)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
701406 Tray 2 Pallet Drawout Error No Pallet at End of Drawout Operation
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Check the condition of the pallet detection (BPH514).
701407 Tray 2 Pallet Drawout Error
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Check the condition of the pallets in the magazine. (Oblique Insertion, etc.).
701408 Tray 2 Pallet Drawout Error
701501 Tray 2 Elevator Change Positoin Change Position Movement Error (Before Operation)
Movement Error
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
Error ID Item Description
701502 Tray 2 Elevator Change Positoin Change Position Movement Error (During Operation)
Movement Error
701503 Tray 2 Elevator Change Positoin
Movement Error
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
701601 Tray 2 Feeder Zeroing Error The rack shutter did not open within the specified
time. (0101)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Check Sensors BPS501 and BPS503.
701602 Tray 2 Feeder Zeroing Error The pallet chuck did not close within the specified
time. (0201)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Check Sensor BPS512.
701603 Tray 2 Feeder Zeroing Error A pallet was detected with the pallet not being drawn
out. (0202)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Check the condition of the pallet detection (BPH514).
701604 Tray 2 Feeder Zeroing Error Failed in the setting of driving waves. (0203)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
0206-001 2-1 13-14 AHB01ETRP
3.3 Error IDs and Remedial Procedures
Error ID Item Description
701605 Tray 2 Feeder Zeroing Error An ejected pallet wad detected with the pallet not
being drawn out. (0301)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Check the condition of the pallet detection (BPH514).
701606 Tray 2 Feeder Zeroing Error The traverse was not zeroed completely within the
specified time. (0302)
701607 Tray 2 Feeder Zeroing Error The traverse was not zeroed completely within the
specified time. (0303)
701608 Tray 2 Feeder Zeroing Error Failed in the setting of driving waves. (0401)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
701609 Tray 2 Feeder Zeroing Error A pallet was not detected although it was drawn out.
(0402)
70160a Tray 2 Feeder Zeroing Error A pallet was not detected although it was drawn out.
(0403)
70160b Tray 2 Feeder Zeroing Error The pallet wad not detected. The drawout log was
cleared. (BPH514) (0501)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Check the condition of the pallet and remove the pallet.
70160c Tray 2 Feeder Zeroing Error Failed in the setting of driving waves. (0601)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
70160d Tray 2 Feeder Zeroing Error The pallet was not detected. Sensor Error! (BPH514)
(0701)
70160e Tray 2 Feeder Zeroing Error The pallet was not detected within the specified time.
(0702)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Check the condition of the pallet.
3.3 Error IDs and Remedial Procedures
0206-001 2-1 13-15 AHB01ETRP