4OM-1075-002.pdf - 第221页

Error ID Item Description 6d1f62 V .Bend Detection Unit Reply time over . 6d1f63 V .Bend Detection Unit Command mismatch. 6d1f64 V .Bend Detection Unit Receive data error . 6d1f65 V .Bend Detection Unit Initial reply . 6…

100%1 / 299
Error ID Item Description
6d1201 Nozzle Stocker Offset Recognition error occurred during teaching.
6d1202 Nozzle Stocker Offset
6d1301 Nozzle Tip Position Offset Recognition error occurred during teaching.
6d1302 Nozzle Tip Position Offset
6d1401 Nozzle Height Offset Sensor is ON.
6d1402 Nozzle Height Offset Sensor is OFF. (1)
6d1403 Nozzle Height Offset Sensor is OFF. (2)
6d1501 Head Master Offset Sensor is ON.
6d1502 Head Master Offset Sensor is OFF. (1)
6d1503 Head Master Offset Sensor is OFF. (2)
6d1601 Lighting Teach Recognition error occurred during teaching.
6d1602 Lighting Teach Recognition error occurred during teaching.
6d1603 Lighting Teach EA05 nozzle not registered.
6d1f02 V.Bend Detection Unit Recognition error.
6d1f50 V.Bend Detection Unit Command send error.
6d1f51 V.Bend Detection Unit Command send error.
6d1f52 V.Bend Detection Unit Command send error.
6d1f53 V.Bend Detection Unit Command send error.
6d1f61 V.Bend Detection Unit Unit error reply.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0308-004 2- 11 1 AHB01ETRP
Error ID Item Description
6d1f62 V.Bend Detection Unit Reply time over.
6d1f63 V.Bend Detection Unit Command mismatch.
6d1f64 V.Bend Detection Unit Receive data error.
6d1f65 V.Bend Detection Unit Initial reply.
6d1f71 V.Bend Detection Unit Unit error reply.
6d1f72 V.Bend Detection Unit Reply time over.
6d1f73 V.Bend Detection Unit Command mismatch.
6d1f74 V.Bend Detection Unit Receive data error.
6d1f75 V.Bend Detection Unit Initial reply.
6d1f81 V.Bend Detection Unit Unit error reply.
6d1f82 V.Bend Detection Unit Reply time over.
6d1f83 V.Bend Detection Unit Command mismatch.
6d1f84 V.Bend Detection Unit Receive data error.
6d1f85 V.Bend Detection Unit Initial reply.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0308-002 2-111 -1 AHB01ETRP
Error ID Item Description
6d1f91 V.Bend Detection Unit Unit error reply.
6d1f92 V.Bend Detection Unit Reply time over.
6d1f93 V.Bend Detection Unit Command mismatch.
6d1f94 V.Bend Detection Unit Receive data error.
6d1f95 V.Bend Detection Unit Initial reply.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
6d2001 Teaching Execute all zero operation.
6d2002 Teaching
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
6d3001 PCB Position Teach Recognition error occurred during teaching.
6d3002 PCB Position Teach Recognition error occurred during teaching.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
0308-001 2-111 -2 AHB01ETRP
3.3 Error IDs and Remedial Procedures