Printer 600 Adjustable Screen Mount.pdf - 第20页
$'-867$ %/(6&5(( 102817 $60 5(3/$&(0( 17352&('8 5(6 12.20 Technical Reference Manual Chapter Issue 3 May 03 5. Fully t ighten the ver tical chase rai l securing bol t and subsequently compl et…
$'-867$%/(6&5((102817$60
5(3/$&(0(17352&('85(6
Chapter Issue 3 May 03 Technical Reference Manual 12.19
access hole in the rear web.
13.Replace the chase rail assembly onto the rear web assembly ensuring the
electrical cable and pneumatic pipe are not trapped.
14.From the front of the machine carefully lift out the chase rail assembly
ensuring the electrical cable and pneumatic pipe does not snag on any part
of the machine.
Fitment 1. Carefully place the chase rail assembly onto the front and rear web assem-
blies from the front of the machine, ensuring the pneumatic pipes and
electrical cables are not trapped under the rail assemblies.
2. At the rear web assembly, lift the end of the chase rail assembly and first,
thread the electrical cable and subsequently the pneumatic pipe through the
access hole in the web.
3. Loosely assemble the chase rail securing bolts (in seven positions) to the
front and rear web assemblies.
4. At the rear web assembly, tighten the two horizontal chase rail securing bolts
until the outer face of the rail just touches the web face.
CAUTION
SECURING BOLTS.
The two rear web horizontal chase rail securing bolts
must not be fully tighten at this juncture otherwise, damage to the
machine may occur.
Rear Web Assembly Chase Rail Assembly
Electrical Connector
Plan View on Rear Web Assembly
$'-867$%/(6&5((102817$60
5(3/$&(0(17352&('85(6
12.20 Technical Reference Manual Chapter Issue 3 May 03
5. Fully tighten the vertical chase rail securing bolt and subsequently complete
the tightening of the two horizontal rear chase rail securing bolts.
6. Route the pneumatic supply pipe and electrical cable to the rear web
connections. Fit the loom and pipe to the appropriate connectors and
Rear Web AssemblyChase Rail Assembly
Chase Rail Securing Bolts
View on Rear Web Assembly
Chase Rail Securing Bolt - Tighten Chase Rail Assembly
Rear Web Assembly
View on Chase Rail Assembly
$'-867$%/(6&5((102817$60
5(3/$&(0(17352&('85(6
Chapter Issue 3 May 03 Technical Reference Manual 12.21
secure the electrical loom with a cable tie.
7. At the front web assembly, fully tighten the four chase rail securing bolts.
8. Connect the Screen Clamps - Off and Screen Clamps - On pneumatic
pipes to the quick release pneumatic connections shown below.
9. Thread the Rail Lock - Front pneumatic pipe through the slot in the rail
width scale assembly and connect the pipe to the front web assembly
Pneumatic
Connection
Electrical
Connection
Cable Tie
View on Rear of ASM
Screen Clamps - Off
Screen Clamps - On
Rail Lock - Front
View on Front Web Assembly