Catalogue, lever-type dial test indicators, EN.pdf - 第30页

G-30 Standard Dimensions : ISO 9493 Performances : Factory standard Units mm Material Housing: Metal Ball inserts: Tungsten carbide Dimensions Insert thread: M1,6 Reading direction Clockwise Dial Rotating dial Remark(s) …

100%1 / 48
67,5
G-29
Analogue lever-type dial test indicators, robust construction
MPEtot: Indication error on the measuring range (retractable and extendable plunger)
MPEp 1: Indication error on 1 rotation
MPEp 2: Indication error on 2 rotations
MPEr: Repeatability of the indication error
MPEh: Hysteresis of indication error
Article
number
MPEtot, retractable and
extendable plunger, µ-in
MPEp 2
µ-in
MPEp 1
µ-in
MPEh
µ-in
MPEr
µ-in
074111377 920 800 400 120 120
074111378 920 800 400 120 120
074111958 1600 800 600 800 120
074111379 920 800 400 120 120
074111957 400 320 160 80 400
Article
number
Serie s
Resolution
in
Measuring
range , in
Ø Dial
in
Travel /
revolution, in
Circular scale
Probe
length n, in
Measuring
force , N
074111377 INTERAPID 312 B-1V .0005 .06 1-1/2 .03 0 ÷ 15 ÷ 0 .65 0,12
074111378 INTERAPID 312 B-2V .0005 .06 1-1/5 .03 0 ÷ 15 ÷ 0 .65 0,12
074111958 INTERAPID 312 B-15V .0005 .06 1-1/2 .03 0 ÷ 15 ÷ 0 2.77 0,12
074111379 INTERAPID 312 B-20V .001 .06 1-1/5 .03 0 ÷ 15 ÷ 0 .65 0,12
074111957 INTERAPID 312 B-3V .0001 .016 1-1/2 .008 0 ÷ 4 ÷ 0 .65 0,25
074111375
G-30
Standard
Dimensions : ISO 9493
Performances : Factory standard
Units mm
Material
Housing: Metal
Ball inserts: Tungsten carbide
Dimensions Insert thread: M1,6
Reading direction Clockwise
Dial Rotating dial
Remark(s)
If the position of the insert is parallel to the surface of the workpiece (left figure),
the 1.1 ratio is accurate. Therefore, the reading does not require any correction.
In the opposite case (right figure), the effective length of the lever changes. The
readings must then be corrected. In this regard, please refer to the user manual.
The original inserts mounted on the instrument can be replaced with inserts that
have either the same or a different ball diameter, provided that the nominal length
of the insert is maintained.
Included in delivery
Lever-type dial test indicator with mounted ball insert Ø 2 mm
Wrench for insert mounting
Rigid stem Ø 8 mm
Rigid stem Ø 4 mm
User manual
Measurement report
Declaration of conformity
01810400
Analogue lever-type dial test indicators, long travel
P-LINE series, standard, metric
17
10.65
9.4
ø40
ø27
8
48.91
18
6.38
1.6
Ø 0.79
14.26
G-31
Analogue lever-type dial test indicators, long travel
MPEe: Indication error on the measuring range (retractable plunger)
MPEtot: Indication error on the measuring range (retractable and extendable plunger)
MPEp 1/10: Indication error on 1/10 rotation
MPEp 1/2: Indication error on 1/2 rotation
MPEp 1: Indication error on 1 rotation
MPEr: Repeatability of the indication error
MPEh: Hysteresis of indication error
Article
number
MPEtot, retractable and
extendable plunger, µm
MPEe, retractable
plunger, µm
MPEp 1
µm
MPEp 1/2
µm
MPEp 1/10
µm
MPEh
µm
MPEr
µm
01810400 13 10 6 5 3 3 3
01810401 13 10 6 5 3 3 3
01810402 26 20 12 10 6 7 3
01810403 26 20 12 10 6 7 3
01810404 13 10 5 3 1 4,5 1,5
01810405 13 10 5 3 1 4,5 1,5
01810406 26 20 10 6 2 8 1,5
01810407 13 10 5 3 1 4,5 1,5
Article
number
Series
Resolution
mm
Measuring range ,
mm
Ø Dial
mm
Travel /
revolution , mm
Circular scale
Probe
length , mm
Measuring
force , N
01810400 P-LINE 213 0,01 1,5 27 0,5 0 ÷ 25 ÷ 50 18 0,35
01810401 P-LINE 213G 0,01 1,5 40 0,5 0 ÷ 25 ÷ 50 18 0,35
01810402 P-LINE 212L 0,01 3 27 1 0 ÷ 50 ÷ 100 36 0,2
01810403 P-LINE 212GL 0,01 3 40 1 0 ÷ 50 ÷ 100 36 0,2
01810404 P-LINE 215 0,002 0,6 27 0,1 0 ÷ 5 ÷ 10 18 0,3
01810405 P-LINE 215G 0,002 0,6 40 0,1 0 ÷ 5 ÷ 10 18 0,3
01810406 P-LINE 215GL 0,002 1,2 40 0,2 0 ÷ 10 ÷ 20 36 0,2
01810407 P-LINE 216G 0,001 0,6 40 0,1 0 ÷ 5 ÷ 10 18 0,3