4OM-996-007.pdf - 第183页

*2 Display Section A Displayed is the outline of the machine information. *3 Display Section B Displayed are the details of the machine information. * 4 [OK] Button When pressed, this button closes the "Machine Info…

100%1 / 417
1.3 Machine Information
1.3.1 "Machine Information" Window
Various machine information is displayed while the machine is running.
While the "Machine Information" window is active, the machine
keeps on running.
Fig. 4B3 Example of "Machine Information"
*1 Machine Information
The machine information is displayed.
Refer to "1.3.2 List of Check Messages" for details.
*5
*4
*1
*2
*3
0509-002 2-11 AIM01ETRP
1.3 Machine lnformation
Note
Note
*2 Display Section A
Displayed is the outline of the machine information.
*3 Display Section B
Displayed are the details of the machine information.
*4 [OK] Button
When pressed, this button closes the "Machine Information" window.
*5 [Clear Alarm] Button
When pressed, this button cancels an alarm (sound) only.
0305-001 2-12 AIM01ETRP
1.3 Machine lnformation
1.3.2 List of Check Messages
Table 4B2
Check Code Display Section A Display Section B
800101 Auto Noz. Bypass Nozzle down error(L)
Started
800102 Auto Noz. Bypass Nozzle down error(H)
Started
800103 Auto Noz. Bypass Handling err-cont:
Started
800104 Auto Noz. Bypass Decreasing of comp.handling rate
Started
800105 Auto Noz. Bypass Selected nozzle position error
Started
800106 Auto Noz. Bypass Nozzle Posture Detection
Started
(Contents) The nozzle was automatically bypassed.
(Description) Follow the described instructions to reset the machine to its normal condi-
tion.
Refer to "3.3 "Head/Noz. Bypass" Tab" in "Section 5" (Vol. 2: Operation
(Supervisor))" for details.
800201 Auto Head Bypass Communication error.
Started
800202 Auto Head Bypass Head origin error.
Started
800203 Auto Head Bypass Overtime head origin error. Set ct:3(fixed value)
Started
800204 Auto Head Bypass Unselected nozzle drop. Set ct:2(fixed value)
Started
800205 Auto Head Bypass CAM position.
Started
800206 Auto Head Bypass Origin Return Action.
Started
800207 Auto Head Bypass Motor Out of Control
Started
800208 Auto Head Bypass Current OverLoad.
Started
800209 Auto Head Bypass Motor not connected.
Started
(Contents) The nozzle was automatically bypassed.
(Description) Follow the described instructions to reset the machine to its normal condi-
tion.
Refer to "3.3 "Head/Noz. Bypass" Tab" in "Section 5" (Vol. 2: Operation
(Supervisor))" for details.
0509-002 2-13 AIM01ETRP
1.3 Machine lnformation