4OM-996-007.pdf - 第71页

1.3 Maintenance Spots 1.3.1 General View Refer to "1.3.2 Inspection, Cleaning, and Lubrication Spots" and after for details. Fig. 4A5 T op View of Machine 1.3 Maintenance Spots (17) P .C.B. T ransfer Section (8…

100%1 / 417
Nozzle for Dispense Gun DG10KIT
Table 4A7
Standard Shape Part No. Remarks
No.14 1 0 1 2 630 062 2591
(Color:
Olive)
No.18 1 0 0 1 630 062 2607
(Color:
Green)
No.19 0 1 1 2 630 062 2621
(Color:
Brown)
No.20 1 0 0 2 630 062 2614
(Color:
Pink)
HL2 Type 0 1 0 1 630 105 4445
RR Type 0 1 0 1 630 110 5307
Grease and Number of Required Nozzles
For DAPHNE
EPONEX
GREASE No. 1
For NEW
MOLYNOC
GREASE No. 1
Total
Frequency
in Use
For DAPHNE
EPONEX
GREASE No. 3
Maker: Sanei Tech
Inside Diameter: φ1.6
Tapered Nozzle
#5114TT-B
Maker: Sanei Tech
Inside Diameter: φ0.84
Tapered Nozzle
#5118TT-B
Maker: Nipro
Inside Diameter: φ0.79
Length: 65 mm
Flattened End
Maker: Sanei Tech
Inside Diameter: φ0.58
Tapered Nozzle
#5120TT-B
Maker: HTI
Maker: HTI
1.2 Preparation for Maintenance
0305-001 1-7 AIM01ETRP
1.3 Maintenance Spots
1.3.1 General View
Refer to "1.3.2 Inspection, Cleaning, and Lubrication Spots" and after
for details.
Fig. 4A5 Top View of Machine
1.3 Maintenance Spots
(17) P.C.B. Transfer Section
(8) Light Source Device for
Component Recognition
(27) L/R Conveyor Sections
(26) Filters and
Fans in Each Section
(2) Vacuum System
(3) Dust Collector and
Waste Tape Box
(7) X/Y Table Section
(20) Placement Height Correction Section
(13) Feeder Carriage
Section
(22) Tape Feed Unit Section
(5) Intermediate Base
(18) Pick-Up Height
Correction Section
(28) Exhaust Cleaner
• Before performing maintenance work, turn off the
power and air sources and lock the power breaker
using the padlock.
• Designate a person who can have charge of the
padlock key.
• The cover of the machine must be detached for
the maintenance work.
After the maintenance work, be sure to attach the
cover.
0412-004 1-8 AIM01ETRP
WARNING
Fig. 4A7 Front View of Machine
Fig. 4A8 Rear View of Machine
1.3 Maintenance Spots
(15) Nozzle Change
Section
(5) Component
Receiving Box
(14) Placement Change
Correction Section
(21) Placement
Up/Down Section
(11) Main Body
Driving Section
(9) Head Section
(23) Nozzle Guide Section
(4) Component Recognition Section
(25) Control Box Section
(24) Head Up/Down Section
(1) Air Source
(10) Linear Measure
Detection Section
(6) Cutter Section
Com
p
onent Dro
p
Prevantion Cover
(12) Cutter Section
(19) Pick-Up
Up/Down Section
(16) Nozzle
Change/Return
Section
0305-001 1-9 AIM01ETRP