4OM-996-007.pdf - 第34页
Safe-23 AIM01E-P Safety Precautions X/Y T able P .C.B. Detection Sensors When a P .C.B. is not positioned correctly on the X/Y table, these sensors are used to stop the machine. T able 1X7 Sensor Name Symbol Countermeasu…
Safe-22 AIM01E-P
Safety Precautions
Feeder Carriage Collision Error Detection Sensors
When some feeder carriage collide with each other, these sensors are used to stop the
machine.
Table 1X6
Sensor Name Symbol Countermeasures
Carriage Collision 12 BPH57
Carriage Collision 23 BPH58
Carriage Collision 34 BPH59
When one of the left sensors has detected an error, the fol-
lowing measures are taken.
• The power to drive Feeder Carriages #1, #2, #3,
and #4 is shut off.
• The rotary turret stops after a cycle of operation.
Ref.: The rotary turret stops with its angle at 0° or 360°.
BPH57
BPH58
BPH59
Top View
Fig. 1X23 Feeder Carriage Collision Error Detection Sensors
0412-001
Safe-23 AIM01E-P
Safety Precautions
X/Y Table P.C.B. Detection Sensors
When a P.C.B. is not positioned correctly on the X/Y table, these sensors are used to stop
the machine.
Table 1X7
Sensor Name Symbol Countermeasures
X/Y Table P.C.B. Detection (Fixed) BPH47
X/Y Table P.C.B. Detection (Movable) BPH49
When one of the left sensors has
detected an error, the following
measures are taken.
• The power to drive the X/Y table is
shut off.
• The rotary turret stops after a cycle
of operation.
Ref.: The rotary turret stops with its
angle at 0° or 360°.
BPH49
BPH47
Fig. 1X24 Location of X/Y Table P.C.B. Detection Sensors
0412-001
Safe-24 AIM01E-P
Safety Precautions
0412-001
4. Alert Labels
The alert labels (described below) are used for this machine.
Please read the instructions on each label carefully and check the contents, observing the
actual object.
Be sure to follow the instructions for safety purposes.
These labels should be kept clean and easily legible at a far safe distance.
When a label has deteriorated and become illegible, contact our service department for
the replacement with a new one.