4OM-996-007.pdf - 第76页
(4) Component Recognition Section (5) Main Section of Machine Intermediate Base/Component Receiving Box Fig. 4A14 1.3 Maintenance Spots Use a suction force (a vacuum cleaner) for cleaning. Do not blow air with an air gun…
(2) Vacuum System
(3) Dust Collector and Waste Tape Box
Waste Tape Box 1D5
Daily Cleaning
Remove the tape chips.
* Tape chips must be removed every 8 hours.
Filter of Dust Collector 1W2
Weekly Cleaning
Detach the air filter and clean it with a vacuum
cleaner or an air gun.
If the filter becomes defective, replace it with a
new one.
1.3 Maintenance Spots
Fig. 4A11
Fig. 4A12
0305-001 1-12
AIM01ETRP
(4) Component Recognition Section
(5) Main Section of Machine Intermediate Base/Component Receiving Box
Fig. 4A14
1.3 Maintenance Spots
Use a suction force (a vacuum cleaner) for cleaning. Do
not blow air with an air gun.
If the component recognition section is dirty or
dusty, incorrect recognition will result.
Fig. 4A13
0412-002 1-13
AIM01ETRP
Notice
Fig. 4A14-1 Front View of Machine
Component Receiving Box 1D8
Daily Cleaning
Clean with a vacuum cleaner.
1.3 Maintenance Spots
0305-001 1-14 AIM01ETRP