YC8_Mainte_E.pdf - 第42页

1-9 1 Maintenance 2.3 Required tools Prepare the following tools and items necessary for maintenance. n T ool list : Supplied with machine, : Options Name Description Remarks Phillips screwdriver Large, small D-2 Slotted…

100%1 / 98
1-8
1
Maintenance
n
Precautions when handling grease
w
WARNING


w
WARNING


w
WARNING

c



1-9
1
Maintenance
2.3 Required tools
Prepare the following tools and items necessary for maintenance.
n
Tool list
: Supplied with machine, : Options
Name Description Remarks
Phillips screwdriver Large, small D-2
Slotted (flat-blade) screwdriver Large, small
Phillips precision screwdriver
#0, #1 (Used to replace nozzle leaf springs and air
valves.)
Hex wrench set 1 set HEX, WRENCH SET
Tweezers Used to replace ejector filters.
Grease gun Used to supply grease
Air blow tool Used for cleaning.
Precision wrench set Used for maintenance of spline shafts.
Oil syringe for nozzle holder Used to supply turbine oil (VG32).
Vacuum assembly Used to clean the surface of the feeder plate.
n
Other tool list
: Supplied with machine, : Options
Name Description
Lithium-based grease (NSL) Used to supply grease to the X, Y, W, PU, Z and CZ axes.
Turbine oil (VG32) Used to lubricate nozzles.
Oil blotting paper Used to check the residual oil
Cleaning paper Use lint-free cleaning paper or wipes (for clean room use).
Cleaning rag Used to clean the spline shafts.
Square cloth Used to prevent parts from being lost or contaminated. (2 sheets).
Cleaning alcohol Use IPA (isopropyl alcohol) or ethanol.
Neutral detergent Used to clean the filter cup.
Paper cup or tray Used for cleaning spline shaft.
Marker pen Used for marking when replacing conveyor belt.
Fine brush (toothbrush, etc.) Used for cleaning during conveyor belt replacement or for polishing O-rings.
Cotton swab stick Used to clean camera lens, half mirror and lighting unit.
Lens cleaner Used to clean camera lens and lighting unit.
Lens blower brush Used to clean camera lens and lighting unit.
Cleaning kit Used for cleaning spline shaft.
n
Safety goggles and mask
Name Description
Dust-proof goggles
Always wear these goggles and mask when using IPA (isopropyl alcohol)
or when performing air blow with an air blow tool.
Dust-proof mask
Chapter 2 Daily maintenance items
Contents
 1
1. Checking the nozzle 2-2
1.1 Checking the nozzles visually 2-2
2. Cleaning the feeder plate 2-4
3. Cleaning the camera protective glass 2-5