YC8_Mainte_E.pdf - 第80页
4-3 4 Lubrication points 2.2 Each axis 2.2.1 X-axis guide and ball screw X-axis guide X-axis guide X-axis lubrication points (Example of V2 head) Guide and ball screw Grease nipples (small) 2 places Grease nipples (small…
4-2
4
Lubrication points
2. Surface mounter
This section describes the lubrication points, intervals and methods.
2.1 Head
2.1.1 Z, CZ-axis
Z-axis lubrication points (Example of V2 head)
Ball screw
Z-axis ball screw
Grease gun:
Manual lubrication:
CZ-axis ball screw
53401-N8-00
Lubrication section Lubrication point Interval Procedure
Z-axis ball screw 1 or 2 3 months Manual lubrication (Apply a thin coat)
CZ-axis ball screw 1 3 months Manual lubrication (Apply a thin coat)
4-3
4
Lubrication points
2.2 Each axis
2.2.1 X-axis guide and ball screw
X-axis guide
X-axis guide
X-axis lubrication points (Example of V2 head)
Guide and ball screw
Grease nipples (small) 2 places
Grease nipples (small) 2 places
Grease gun:
Manual lubrication:
X-axis ball screw
Grease nipples (large) 1 place
53402-N8-00
Lubrication section Lubrication point Interval Procedure
Guide 4
Once every
monthly
Grease gun: Bent type nozzle
Ball screw 1 Grease gun: Standard nozzle
4-4
4
Lubrication points
2.2.2 Y-axis guide and ball screw
Y-axis lubrication points
Grease nipples for
Y-axis guide
Grease nipples for
Y-axis guide
Grease gun:
Manual lubrication:
Grease nipple for Y-axis
ball screw
Rear view
53403-N8-00
Lubrication section Lubrication point Interval Procedure
Guide 2
Once every
monthly
Grease gun: Standard nozzle
Ball screw 1