YAMAHA errer code-a.pdf - 第31页

Ea - 31 ERROR MESSAGES LIST Ea Ea03507 Ea03601 Ea03602 Ea03603 Ea03604 Ea03605 Ea03606 Ea03607 Ea03608 Ea03609 Ea03610 Ea0361 1 Ea03612 Ea03613 Ea03614 Ea03615 Ea03616 Ea03617 Ea03618 Ea03619 Ea03620 Ea03621 Ea03622 Ea03…

Ea -30

ERROR MESSAGES LIST

Ea03043

Ea03044

Ea03045

Ea03095

Ea03096

Ea03097

Ea03100

Ea03101

Ea03102

Ea03103

Ea03104

Ea03105

Ea03106

Ea03107

Ea03108

Ea03110

Ea03111

Ea03112

Ea03113

Ea03120

Ea03121

Ea03122

Ea03123

Ea03200

Ea03202

Ea03203

Ea03210

Ea03501

Ea03502

Ea03503

Ea03504

Ea03505

Ea03506

CAUTION: Please check barcodes, then clear the INTER-

LOCK error using line control system.

Mount Data ***

Component Data *** Name ***

Feeder set position **

INTERLOCK clear.

NUMBER: ***

ERROR BRING BACK COMPONENTS

Vacuum level is too high.The following item causes it.

The component may be sticked on the nozzle. The nozzle

is pluged. The setting for vacuum level is wrong.

TABLE ***

HEAD ***

CURRENT VAC ***

SETTING VAC ***

Please stop the production and check these points.

There is not parameter to edit special setting. This com-

mand is not (yet) available.

Failed to load special setting.

Failed to save special setting value.

NO SCHEDULE

Please throw in new schedule to the machine. You can

send it from YVOSX via communication.

Please exchenge FES system.

FrontID ***

Detected FES system ID is different from next PCB data.

Please exchenge FES system.

RearID ***

Detected FES system ID is different from next PCB data.

Please exchenge FES system.

FrontID ***

RearID ***

Detected FES system ID is different from next PCB data.

Please recieve specific FES setting of machine once

before checking. Press the [ENTER] key to recieve. Press

the [ESC] key to abort.

Please send FES setting after checking. Press the [EN-

TER] key to send. Press the [ESC] key to abort.

No Need to chenge setting of FES. Please check next

item.

1.Don’t recieve FES setting from machine.

2.Difference of PCB data on machine and PC.

3.Already finish changing FES setting.

There is a interrupted schedule. Press the [SPACE] key

to abandon it and to read new schedule, or any other key

to abort.

SCHEDULE FILE READ ERROR.

Please check schedule file format, or try to read new

schedule.

FIRST PCB CHECK

Please check first pcb of a lot by moving camera. Press

the [SPACE] key to check, or any other key to abort. Af-

ter checking and correcting, please return to RUNNING

mode and start production.

FINAL PCB CHECK

Please check last pcb of a lot by moving camera. Press

the [SPACE] key to check, or any other key to abort. Af-

ter checking and correcting, please return to RUNNING

mode and start production.

FIRST PCB CHECK

Please check first pcb of a lot on the conveyor of tray

changer. Press the CHECK button on the conveyor be-

fore picking uo PCB. After checking pcb, put it on the

conveyor and release CHECK button.

FINAL PCB CHECK

Please check last pcb of a lot on the conveyor of tray

changer. Press the CHECK button on the conveyor be-

fore picking uo PCB. After checking pcb, put it on the

conveyor and release CHECK button.

CONVEYOR WIDTH ERROR

When you want to chenge conveyor width less than

250.00mm, please remove fixed buckup plate before

changing. (Then sensor NL06 detected the plate.)

Please recieve specific FES setting of machine once

before comfirming. Press the [ENTER] key to recieve.

Press the [ESC] key to abort.

No need to setup for next production. Please check next

item.

1.Don’t recieve FES setting from machine.

2.Difference of PCB data on machine and PC.

3.Already finish changing FES setting.

4.Current schedule has not recieved from MCH.

Clear flag for setup for next production. Press the [EN-

TER] key to clear it on PC, but the call on machine will

not clear.

DEFINED PRODUCTION AMOUNT OF PCBs IS

REACHED. Change PCB data using Barcode Reader

connected to PC.

COMMUNICATION ERROR

Cannot confirm machine condition by communication

command. Error in the communication settings in the

machines or PC.

W-axis interlock stop.

DATA READ ERROR

Failed to read Multi-Macs data from Component-DATA-

BASE.

Database No. ***

Please check

1.Database number for Multi-Macs in Machine Data.

2.Component-DATABASE.

WAFER TRAY CHANGER ERROR

The component can not be found on the wafer tray

changer head. It may be lost during traverse.

Mount data ***

Component data *** Name ***

Pallet **

WT Head **

WAFER TRAY CHANGER ERROR

The component can not be found on the wafer tray

changer station. It may be left on the WT head.

Mount data ***

Component data *** Name ***

Pallet **

WT Station ***

WAFER TRAY CHANGER ERROR

The component can not be handed to the main machine

head. It may be left on the WT head.

Mount data ***

Component data *** Name ***

Pallet **

WT Head ***

WAFER TRAY CHANGER ERROR

The component can not be handed to the main machine

head. It may be left on the WT station.

Mount data ***

Component data *** Name ***

Pallet **

WT Station ***

WAFER TRAY CHANGER ERROR

Failed to pick up the component from the wafer. It can

not be found on the wafer tray changer head.

Mount data ***

Component data *** Name ***

Pallet **

WT Head ***

WAFER TRAY CHANGER ERROR

Continuous badmark count reached the specified limit.

Mount data ***

Component data *** Name ***

Pallet **

Ea -31

ERROR MESSAGES LIST

Ea03507

Ea03601

Ea03602

Ea03603

Ea03604

Ea03605

Ea03606

Ea03607

Ea03608

Ea03609

Ea03610

Ea03611

Ea03612

Ea03613

Ea03614

Ea03615

Ea03616

Ea03617

Ea03618

Ea03619

Ea03620

Ea03621

Ea03622

Ea03623

Ea03624

Ea03625

Ea03626

Ea03627

Ea03628

Ea03629

Ea03630

Ea03631

WAFER TRAY CHANGER ERROR

Continuous component error count reached the speci-

fied limit.

Mount data ***

Component data *** Name ***

Pallet **

PCB DATA ERROR

The “FeederType Wafer” can not be used for component

data V20 compatible mode.

Machine *

Component data *** Name ***

PCB DATA ERROR

No mark is specified for the “Mark for Comp” field of the

wafer component.

Machine *

Component data *** Name ***

PCB DATA ERROR

No mark data exists for the “Mark for Comp” of the wafer

component.

Machine *

Component data *** Name ***

PCB DATA ERROR

The “MarkType” is not suitable for the “Mark for Comp” of

the wafer component.

Machine *

Component data *** Name ***

PCB DATA ERROR

The “SearchArea” is larger than F.O.V. of the camara for

the “Mark for Comp” of the wafer component.

Machine *

Component data *** Name ***

PCB DATA ERROR

No mark data exists for the “Mark for Bad” of the wafer

component.

Machine *

Component data *** Name ***

PCB DATA ERROR

The “MarkType” is not suitable for the “Mark for Bad” of

the wafer component.

Machine *

Component data *** Name ***

PCB DATA ERROR

The “SearchArea” is larger than F.O.V. of the camara for

the “Mark for Bad” of the wafer component.

Machine *

Component data *** Name ***

PCB DATA ERROR

The relation between “InitSearchDir” and

“SwitchDirection” is illogical.

Machine *

Component data *** Name ***

PCB DATA ERROR

The relation between “InitSearchDir” and “CurSearchDir”

is illogical.

Machine *

Component data *** Name ***

PCB DATA ERROR

No Wafer-TC head carries the nozzle that can handle

this component.

Machine *

Component data *** Name ***

PCB DATA ERROR

No Wafer-TC station can handle this component.

Machine *

Component data *** Name ***

PCB DATA ERROR

Illegal pallet number for the wafer component.

Machine *

Component data *** Name ***

PCB DATA ERROR

Negative value for the “TapeThickness” is not allowed.

Machine *

Component data *** Name ***

PCB DATA ERROR

Negative value for the “WaferDia.” is not allowed.

Machine *

Component data *** Name ***

PCB DATA ERROR

Negative value for the “RingDiameter” is not allowed.

Machine *

Component data *** Name ***

PCB DATA ERROR

”WaferDia.” should be smaller than “RingDiameter”.

Machine *

Component data *** Name ***

PCB DATA ERROR

Negative value for the “CompPitch” is not allowed.

Machine *

Component data *** Name ***

PCB DATA ERROR

”Start Pos” is out of the “WaferDia.”.

Machine *

Component data *** Name ***

PCB DATA ERROR

”Current Pos” is out of the “WaferDia.”.

Machine *

Component data *** Name ***

PCB DATA ERROR

”Comp Num” is out of the allowed range.

Machine *

Component data *** Name ***

PCB DATA ERROR

”Start Count” is out of the allowed range.

Machine *

Component data *** Name ***

PCB DATA ERROR

”Current Count” is out of the allowed range.

Machine *

Component data *** Name ***

PCB DATA ERROR

The relation between “Start Pos” and “Start Count” is il-

logical.

At least one edge will be out of the “WaferDia.”.

Machine *

Component data *** Name ***

PCB DATA ERROR

The relation between “Current Pos” and “Current Count”

is illogical. At least one edge will be out of the “WaferDia.”.

Machine *

Component data *** Name ***

PCB DATA ERROR

The “WaferDia.” is out of the LXY moving area.

Machine *

Component data *** Name ***

PCB DATA ERROR

The “EjectHeight” is out of the LU moving area.

Machine *

Component data *** Name ***

PCB DATA ERROR

The “PickHeight” is out of the LP moving area.

Machine *

Component data *** Name ***

PCB DATA ERROR

The “EjectDownTiming” is out of the LP moving area.

Machine *

Component data *** Name ***

PCB DATA ERROR

The “Wafer Pick Height” is too deep.

Machine *

Component data *** Name ***

PCB DATA ERROR

The “Wafer Place Height” is too deep.

Machine *

Component data *** Name ***

Ea -32

ERROR MESSAGES LIST

Ea05004

Ea05005

Ea05006

Ea05007

Ea05008

Ea05010

Ea05011

Ea05012

Ea05013

Ea05014

Ea05015

Ea05016

Ea05017

Ea05018

Ea05019

Ea05020

Ea05021

Ea05022

Ea05023

Ea05024

Ea05025

Ea05026

Ea05027

Ea05028

Ea05029

Ea05030

Ea03632

Ea03651

Ea03652

Ea03653

Ea03654

Ea03655

Ea03656

Ea03657

Ea03658

Ea03659

Ea03660

Ea03661

Ea03662

Ea03663

Ea03664

Ea03665

Ea03666

Ea03667

Ea05000

Ea05001

Ea05002

Ea05003

PCB DATA ERROR

The “Pick Height” is too deep for Flip component.

Machine *

Component data *** Name ***

INTERLOCK ERROR

Wafer LXY axes can not move because the hook unit is

down. Check the up-down sensor for the hook unit.

INTERLOCK ERROR

Wafer LXY axes can not move because a pallet is not on

the proper position. Check the pallet position and the pallet

sensor.

INTERLOCK ERROR

Wafer LXY axes can not move because LP axis position

is lower than safe position. Check the position of wafer

LP axis.

INTERLOCK ERROR

Wafer LXY axes can not move because LU axis position

is higher than safe position. Check the position of wafer

LU axis.

INTERLOCK ERROR

Wafer LXY axes can not move because the pallet is not

fixed. Check the fixation and the sensor of the pallet.

INTERLOCK ERROR

Wafer LXY axes can not move because the target posi-

tion interfere with wafer ring. Move down the ejector unit.

INTERLOCK ERROR

Wafer LH axis can not move because the LXY axes are

not on the proper position.

Check the position of wafer LXY axes.

INTERLOCK ERROR

Wafer LZ axis can not move because a pallet is out of the

magazine. Check the pallet position and the sensor.

INTERLOCK ERROR

Wafer LZ axis can not move because the latch is open.

Check the latch sensor.

INTERLOCK ERROR

Wafer LT axis can not perform quick action because the

LP axis position is too low. Check the position of wafer

LP axis.

INTERLOCK ERROR

Wafer LT axis can not move because the LP axis posi-

tion is too low. Check the position of wafer LP axis.

INTERLOCK ERROR

Wafer LT axis can not move because the LS axis posi-

tion is too high. Check the position of wafer LS axis.

INTERLOCK ERROR

Wafer LR axis can not perform quick action because the

LP axis position is too low. Check the position of wafer

LP axis.

INTERLOCK ERROR

Wafer LR axis can not move because the LP axis posi-

tion is too low. Check the position of wafer LP axis.

INTERLOCK ERROR

Wafer LS axis can not move because the LT axis posi-

tion is above the LS axis.

Check the position of wafer LT axis.

INTERLOCK ERROR

Wafer LU axis can not move because the LXY axes are

moving. Check the status of wafer LXY axes.

INTERLOCK ERROR

Wafer LU axis can not move because the ejector unit is

down. Check the ejector unit sensor.

SYNTAX ERROR

A grammar mistake exists in the program.

DATA ERROR

There is a mistake in the input data format.

NUMBER ERROR

There is a mistake in the input number. There is a mis-

take in the value of the expression.

BIT NUMBER ERROR

A bit number is outside the range 1 to 16

PORT NUMBER ERROR

There is a mistake in the input/output port number.

Can not use 'I' and 'O' as the port number.

TABLE NUMBER ERROR

A table number is outside the range 0 to 9.

DIGIT NUMBER ERROR

The digit of a binary numeral has exceeded 16 digits.

The decimal numeral has exceeded 7 digits. The hexa-

decimal numeral has exceeded 4 digits.

ILLEGAL AXIS NAME

There is a mistake in the axis name.

ILLEGAL ORDER

There is a mistake in bit designation to the input/output

port. Change to ascending order starting from right.

OVERFLOW

The value for the "SPEED" command/the parameter set-

ting command is outside the allowable range.

STACK OVERFLOW

A parenthesis was used 6 times or more in succession in

an expression. A stack area for checking grammar/ex-

ecution overflowed.

ILLEGAL VARIABLE

In "SEND" command, a variable other than a global vari-

able was used.

TYPE MISMATCH

Both sides of expression do not match. Numeral/variable/

expression of the type which was not allowed was used.

FOR VARIABLE ERROR

NEXT statement variable terms corresponding to FOR

statement does not match.

WEND WITHOUT WHILE

No WHILE statement corresponding to WEND statement.

WHILE WITHOUT WEND

No WEND statement corresponding to WHILE statement.

NEXT WITHOUT FOR

No FOR statement corresponding to NEXT statement.

"NEXT" command was executed without "FOR" com-

mand.

FOR WITHOUT NEXT

No NEXT statement corresponding to FOR statement.

ENDIF WITHOUT IF

No IF statement corresponding to ENDIF statement.

ELSE WITHOUT IF

No IF statement corresponding to ELSE statement.

IF WITHOUT ENDIF

No ENDIF statement corresponding to IF statement.

ELSE WITHOUT ENDIF

No ENDIF statement corresponding to ELSE statement.

END SUB WITHOUT SUB

No SUB statement corresponding to END SUB statement.

"END SUB" command was executed without "SUB" com-

mand.

SUB WITHOUT END SUB

No END SUB statement corresponding to SUB statement.

DUPLICATED VARIABLE

Two or more array variables of the same name were de-

fined

DUPLICATED IDENTIFIER

Two or more identifiers of the same name were defined.

DUPLICATED LABEL

Two or more the same labels were defined.

UNDEFINED ARRAY

Assignment/reference was done for undefined array.

UNDEFINED IDENTIFIER

An undefined identifier was used.

UNDEFINED LABEL

Reference made to undefined label.