YAMAHA errer code-a.pdf - 第7页

Ea - 7 ERROR MESSAGES LIST Ea Ea00177 Ea00178 Ea00179 Ea00180 Ea00181 Ea00182 Ea00183 Ea00184 Ea00185 Ea00186 Ea00187 Ea00189 Ea00190 PCB DA TA ERROR When using component check function, you must pre- pare some Mark data…

Ea -6

ERROR MESSAGES LIST

Ea00155

Ea00156

Ea00157

Ea00158

Ea00159

Ea00160

Ea00161

Ea00162

Ea00163

Ea00164

Ea00165

PLEASE CHECK FOR ANY ILLEGAL RUNNING CON-

DITION

Check followings. If all OK, please continue.

ProductionShould be [WithVacChk].

Vision AlignShould be [UseVision].

PCB Fix Device Not Equipped device is not available.

Ent. Stopper Available if is equipped.

PCB Trans Mode Should be [Normal].

PCB Size is not within range.

PCB DATA ERROR

The nozzle for the component specified in the mount data

does not exist in nozzle station.

Mount data 765

Component data 150

PCB DATA ERROR

The head specified in the mount data cannot align the

component.

Mount data 765

Component data 150

COMPONENT DATA ERROR

Feeder Position must be Teaching for tray feeder compo-

nent.

Mount data 765

Component data 150

PCB DATA ERROR

The mount data has a component that cannot be attached

to the specified nozzle type.

Mount data 765

Component data 150

PCB DATA ERROR

The component cannot be handled by any nozzle.

Mount data 765

Component data 150

PCB DATA ERROR

The component size is bigger than the laser window size

of LASER alignment module.

Mount data 765

Component data 150

PCB DATA ERROR

Illegal Comp.Amount or TrayAmount

Specified in the component data.

In case using "Alternate Component" function or "Count

Out Stop", Y-Component Amount in TRAY information is

necessary to input data.

Mount data

Component data

Name

PCB DATA ERROR

Illegal Pallet-Start and Last number specified in the com-

ponent data.

Mount data 765

Component data 150

PCB DATA ERROR

Pickup position in tray unit is outside the moving area.

Mount data 765

Component data 150

axes LX

PCB DATA ERROR

Too much local fiducial data are found.

(meaning)The operating conditions which have been specified are

not appropriate for production.

(cause)The production conditions have not been set for a vacuum

check; the regular image processing correction is not being used; a

PCB securing method has been selected which is not available

with the machine; the regular transport mode is not being used; or

the PCB size is not within the specifications.

(remedy)Go back to the editing screen and change the operating

conditions, or change the settings for the operating conditions.

(meaning)The nozzle used with the components specified in the

mounting data does not exist in the nozzle station.

(cause)The head setting is wrong and a nozzle which can be used

to pick up the components does not exist in the nozzle station, or

the component setting is wrong and there is no nozzle which can

be used to pick up the components.

(remedy)Go back to the editing screen and check the mounting

and component data.

(meaning)The head specified in the mounting data does not corre-

spond to the recognition unit which corresponds to the components.

(cause)The wrong head number has been specified, or the wrong

recognition unit has been specified.

(remedy)Go back to the editing screen and correct the recognition

unit or the head number.

(meaning)Teaching must be used for the position at which tray com-

ponents to be picked up.

(cause)The pickup position coordinates have been specified auto-

matically.

(remedy)Go back to the editing screen and use teaching to change

the pickup position coordinates. Also use teaching to correct the

pickup coordinates.

(meaning)The head specified in the mounting data does not con-

tain the right nozzle for picking up the specified components.

(cause)The wrong head number has been specified, or the wrong

nozzle has been specified for use with the components.

(remedy)Go back to the editing screen and edit the mounting data

or the component data.

(meaning)No nozzle exists which can be used to pick up the com-

ponents specified in the mounting data.

(cause)There is a problem with the specification of the pickup nozzle

in the component data.

(remedy)Go back to the editing screen and edit the component

data.

(meaning)The components specified in the mounting data are out-

side of the range for which laser recognition is possible.

(cause)An attempt was made to use laser recognition with compo-

nents which are too big.

(remedy)Go back to the editing screen and change the recognition

unit.

(meaning) Setting for number of components or number of trays in

component data is incorrect.

(cause) Number of components or number of trays has not been

specified, or illegal value has been set.

(remedy) Go back to edit screen and edit number of components

or number of trays.

(meaning)There is a problem with the starting or ending pallet num-

ber in the component data.

(cause)A number which does not exist has been specified as the

starting or ending pallet number, or an ending number has been

specified which is larger than the starting number.

(remedy)Go back to the editing screen and edit the starting or end-

ing pallet number.

(meaning)The pickup position for components in the external tray

is not within the movement range of the external tray axis.

(cause)The coordinates for the pickup position in the component

data are not appropriate.

(remedy)Go back to the editing screen and re-teach the pickup

position.

(meaning)The number of local fiducial data exceeds the allowable

limit.

(cause)The number of local fiducial is too large.

(remedy)Go back to the editing screen and reduce the number of

local fiducial being used.

Ea00166

Ea00167

Ea00168

Ea00169

Ea00170

Ea00171

Ea00172

Ea00173

Ea00174

Ea00175

Ea00176

PCB DATA ERROR

This machine is not equipped with a Dump station.

Component data 150

NO COMPONENT

Hit the [ESC] key to go next step. Hit the [ENTER] key to

recover this component again.

Mount data 765

Component data 150

PCB DATA ERROR

PCB BADMARK, BLOCK BADMARK, LOCAL

BADMARK and PRECEDING PICKING cannot be ex-

ecuted at the same time.

PCB DATA ERROR

You can't use alternative component function for tray com-

ponent.

Mount data 765

Component data 150

PCB DATA ERROR

Alternative component is on the different table from the

original one.

Mount data 765

Component data 150

PCB DATA ERROR

Required Nozzle for alternative component is different

from original one.

Mount data 765

Component data 150

Component runs out.

Will you switch component?

Press [ENTER] to switch, others not to.

Current component 150

Feeder set position 21

Alternative component 151

Feeder set position 22

PCB DATA ERROR

Feeder Type for alternative component is different from

original one.

Mount data 765

Component data 150

PCB DATA ERROR

Setting for alternative component must end original one.

Mount data 765

Component data 150

PCB DATA ERROR

When using component check function, there must be

PriDispense data which is pointed by fiducial number in

mount data.

Mount data 765

PreDispense data 1

PCB DATA ERROR

When using component check function, Mark number in

Predispense data must be set which is used by mount

data.

Mount data 765

PreDispense data 1

(meaning)A dump station has been specified in the component data

even though no dump station has been installed in the machine.

(cause)Same as above.

(remedy)Go back to the editing screen and change the dump method

specified in the component data.

(meaning)When the PCB was checked for components following

placing, no components were found on it.

(cause)There was an error in placing earlier components on the

PCB, or the sensor has not been adjusted correctly.

(remedy)If the error has occurred even though components were

actually placed on the PCB, simply press the ESC key. If no compo-

nents have actually been placed on the PCB, press the Enter key to

place those components once again.

(meaning)When the bad mark function is being used, the preced-

ing picking function cannot be used.

(cause)The bad mark and preceding picking functions cannot be

used in combination.

(remedy)Go back to the editing screen and cancel either the pre-

ceding pickup function or the bad mark function.

(meaning)The alternative component function has been indicated

when there are no more components left on the tray.

(cause)Same as above.

(remedy)Go back to the editing screen and set a value of "0" for the

alternative component function.

(meaning)The tables for the original components and the alterna-

tive components are different.

(cause)The original components have been specified for Table A

and the alternative components for Table B, or the reverse.

(remedy)Go back to the editing screen and change the feeder set-

ting number in the component data, so that movement is made to

the same table.

(meaning)Different nozzles have been specified for the original com-

ponents and the alternative components.

(cause)Same as above.

(remedy)Go back to the editing screen and check the nozzle set-

ting in the component data.

(meaning)The components have been judged as having run out,

because of a pickup error. This asks whether or not alternative com-

ponents should be used

(cause)Because of a pickup error, the system has decided that com-

ponents have run out. To change to alternative components, press

the Enter key. If not changing to alternative components, press any

other key to continue using the original components. If original com-

ponents still exist but cannot be picked up because of a problem

with the feeder or for another reason, a change to alternative com-

ponents cannot be executed.

(remedy)Check the feeder status and either switch to alternative

components, or continue using the original components.

(meaning)The feeder containing the alternative components is dif-

ferent from that containing the original components.

(cause)Same as above.

(remedy)Go back to the editing screen and change the feeder be-

ing used in the component data.

(meaning)When using the component check function, which is a

special function there is a problem with the PCB data.

(cause)The check coordinates specified by the point fiducial num-

ber in the placing data are not included in the pre-dispensing data.

(remedy)Create the check coordinates in the pre-dispensing data.

(meaning)When using the component check function, which is a

special function there is a problem with the PCB data.

(cause)No mounting data number has been specified in the pre-

dispensing data which contains the check coordinates.

(remedy)Specify the mounting data number in the pre-dispensing

data.

Ea -7

ERROR MESSAGES LIST

Ea00177

Ea00178

Ea00179

Ea00180

Ea00181

Ea00182

Ea00183

Ea00184

Ea00185

Ea00186

Ea00187

Ea00189

Ea00190

PCB DATA ERROR

When using component check function, you must pre-

pare some Mark data. But it doesn't exist or is not suit-

able.

Mount data 765

PreDispense data 1

Mark data 1

PCB DATA ERROR

CountOutStop must be same among alternative compo-

nents group.

Mount data 765

Component data 150

PCB DATA ERROR

Specified alternative component doesn't exist.

Mount data 765

Component data 150

PCB DATA ERROR

Feeder type of the component is different from the one of

the fixed component data.

Mount data 765

Component data 150

PCB DATA ERROR

Failed to read the fixed component data.

Mount data 765

Component data 150

PCB DATA ERROR

Specified fixed component doesn't exist.

Mount data 765

Component data 150

PCB DATA ERROR

The number of block repeat data exceeds limitation.

Maximum quantity is 765 .

PCB DATA ERROR

Component Name must be same among alternative com-

ponents group.

Mount data 765

Component data 150

PCB DATA ERROR

Usage of UpdateGroupNo must be same among alterna-

tive components group.

Mount data 765

Component data 150

PCB DATA ERROR

Local badmark position is outside moving area.

Mount data 3

Local Badmark data 5

Axes X

PCB DATA ERROR

No mark data available for the local badmark. Or the mark

data is not for badmark.

Mount data 7

Mark data 2

PCB DATA ERROR

Pickup position is outside moving area for soft landing

motion.

Mount data 765

Component data 150

Axes Z1

PCB DATA ERROR

Mount position is outside moving area for soft landing

motion.

Mount data 765

Component data 150

Axes Z1

(meaning)When using the component check function, which is a

special function there is a problem with the PCB data.

(cause)No mark information for bad marks has been specified in

the pre-dispensing data which contains the check coordinates.

(remedy)Create the mark information for the bad marks.

(meaning)Components which are organized in a series by the al-

ternative component settings do not have the same count stop set-

tings.

(cause)Alternative components in a series have different count stop

settings, so they will either stop or not stop.

(remedy)Standardize the settings.

(meaning)The specified alternative components do not exist.

(cause)There are no alternative components that match the set-

ting.

(remedy)When using alternative components, create data for the

alternative components corresponding to the specified number, or

do not specify alternative components.

(meaning)The feeder type specified in the PCB data is different

from that in the fixed components data.

(cause)A different type of feeder has been specified in the PCB

data from that specified in the fixed components data.

(remedy)Change one setting or the other so that they match.

(meaning)An error occurred when reading the fixed component data.

(cause)No fixed component data file exists in the machine, or the

fixed components data file has been destroyed.

(remedy)Copy the fixed component data from the backup disk.

(meaning)The specified component data does not exist.

(cause)The fixed component data corresponding to the fixed com-

ponent data number specified in the mounting data does not exist.

(remedy)Do not use the fixed component data, or create new fixed

component data.

(meaning)The number of block repeats exceeds the rated limit.

(cause)The specified number of block repeats exceeds the maxi-

mum limit of 512.

(remedy)Specify a number of block repeats that is 512 or less.

(meaning)The names of several components in a series of alterna-

tive components are different.

(cause)The names of all alternative components must be the same.

(remedy)Specify the names of alternative components linked in a

series so that all of the names are the same.

(meaning)In the component data for a series of alternative compo-

nents, there are some data which refer to fixed component data

and some which do not.

(cause)With alternative components, the fixed component data ref-

erences for series component data must be the same.

(remedy)Standardize the settings so that the fixed component data

is either referenced or not referenced for all of the alternative com-

ponent data in the series.

Please input correct position of Local Badmark.

(meaning)The mark data for the specified not an badmark does not

exist.

(cause)No mark data exists.

(remedy)Create the mark data.

(meaning)QFP components cannot be picked up using this mount-

ing method because of an incorrect setting in the pickup heights.

(cause)

(remedy)Check the settings for pickup heights.

(meaning)When the QFP mounting method is being used, the

mounting position height is not within the soft limit.

(cause)When the QFP mounting method is being used, the setting

for the mounting position height is outside of the soft limit.

(remedy)Check the setting for the mounting position height.

Ea00191

Ea00192

Ea00193

Ea00194

Ea00195

Ea00197

Ea00198

Ea00199

Ea00200

Ea00201

Ea00202

Ea00203

PCB DATA ERROR

No nozzle to attach to the head.

AxisTable A

Head 2

The number of possessed nozzle may not be enough.

Current nozzles on heads are different from the nozzles

necessary for this PCB.XY TABLE[Upper = Head No.,

Lower = Nozzle Type]

Head 1 2 3 4 5 6 7 8

Nzl. 1 1 1 2 2 2 2 2

Please check each heads equipped with nozzles as

shown below.

XY TABLE[Upper = Head No., Lower = Nozzle Type]

Head 1 2 3 4 5 6 7 8

Nzl. 1 1 1 2 2 2 2 2

PCB DATA ERROR

Component will interfere with other nozzles.

Mount data 765

Component data 150

Head 2

PCB DATA ERROR

PCB width is outside moving area.

Axes LW

PCB SIZE ERROR

Width of PCB is out of range.

SpDat[PLTnum_inf0](mm)

[PCB Width]

SpDat[PLTnum_inf1](mm)

Please set width of PCB again.

PCB DATA ERROR

No local badmark data is set to "Note" for executable

mounting data. During production, "Note" data is ignored.

So if you want to use local badmark function, set this "

Exec". If not, set "0" for BadMk in mounting data.

Mount Data 6

Local Badmark Data 3

PCB DATA ERROR

The PCB has too many mount data.

NOZZLE CHANGE ERROR

Failed to pick up a nozzle. Please check the sensor of

the nozzle station and adjust height, angle and position

data of the nozzle station.

Head No. 2

Station No. 11

NOZZLE CHANGE ERROR

Failed to store a nozzle. Please check the sensor of nozzle

station and adjust height, angle and position data of the

nozzle station.

Head No. 2

Station No. 11

DOWNLOAD WINDOW DATA ERROR

Failed to download the window data of the laser unit.

Please Power OFF the machine and check the connec-

tion of the laser unit.

NOZZLE STATION ERROR

One or more nozzle(s) are not present on the nozzle sta-

tion. Please check the sensors of the nozzle station and

insert the appropriate nozzle(s).

Head No. 2

(meaning)The specified nozzle cannot be attached to the head.

(cause)Because the setting for the number of nozzles is wrong, there

are not enough nozzles to be attached to the head, or it is not pos-

sible to use more than the current number of nozzles.

(remedy)If the nozzles are available, change the setting for the num-

ber of nozzles In any other case, create PCB data which does not

specify a head using the same nozzles.

(meaning)The nozzles which are currently attached are not the right

combination for the PCB about to be manufactured.

(cause)The wrong combination of nozzles was used when the setup

was changed.

(remedy)Attach the correct nozzles, following the instructions on

the display.

(meaning)This is the display showing the nozzle settings required

for the PCB about to be manufactured. It is not an error message.

(cause)None

(remedy)Check to make sure the nozzles which have been speci-

fied match those displayed before starting production.

(meaning)The component is interfering with the adjacent nozzle.

(cause)Because the component is large, it is interfering with the

nozzle next to it.

(remedy)Create the appropriate data and try again.

(meaning)The PCB width is not within the soft limit.

(cause)An attempt was made to use a PCB which is not within the

specifications, or there is something wrong with the PCB width set-

ting.

(remedy)Check the PCB width setting.

(meaning) PCB width is out of range being used.

(cause) PCB width has not been set within a range of $$$ mm (mini-

mum) to ### mm (maximum).

(remedy) Set PCB width to value within a range of $$$ mm to ###

mm.

If you want to use local badmark function. Set "skip?" parameter

"Exec". If you don't want to use set "0" in mount data

(meaning)The nr. of mount data exceeds limit.

(cause)The nr. of mount data exceeds limit.

(remedy)Delete some mount data. Or delete some skip data in block

repeat and etc.

(meaning)The nozzle could not be picked up.

(cause)The nozzle station sensor may be defective, or the height,

angle, or XY coordinates may not have been correctly adjusted in

the nozzle station information.

(remedy)Adjust the sensor. Also, re-adjust the nozzle position, angle,

and height in the nozzle station information.

(meaning)An error occurred when housing the nozzle.

(cause)The nozzle station sensor may be defective, or the height,

angle, or XY coordinates may not have been correctly adjusted in

the nozzle station information.

(remedy)Check the operation of the nozzle station sensor. Also, re-

adjust the nozzle position, angle, and height in the nozzle station

information.

(meaning)An error occurred when transferring window data to the

laser recognition unit.

(cause)An error occurred in sending the data because of noise or

another factor, or the laser recognition unit has become disconnected

from the I/O board.

(remedy)Check the laser recognition unit connections, and then turn

the power supply off and try running the machine again. Check to

see how often the problem occurs, and contact the manufacturer if

necessary.

(meaning)Several nozzles are produced from the nozzle station of

the specified head.

(cause)The nozzle station sensor may be defective, or several

nozzles have been removed from the nozzle station.

(remedy)Make sure the correct nozzles are stored in the nozzle

station, or check the operation of the nozzle station sensor.

Ea -8

ERROR MESSAGES LIST

Ea00204

Ea00205

Ea00206

Ea00207

Ea00220

Ea00221

Ea00222

Ea00223

Ea00230

Ea00231

Ea00232

NOZZLE STATION ERROR

There is no nozzle present for next sequence. Please

check nozzle station data.

Head No. 2

Station No. 11

NOZZLE STATION ERROR

There is more than one nozzle for next sequence. Please

check sensors of the nozzle station and insert the appro-

priate nozzle(s).

Head No. 2

Station No. 11

DATA ERROR

The next mount sequence specifies that more than three

heads are used or the head number used is 3 or more.

Please check the mount data.

DATA ERROR

The next mount sequence specifies that more than three

heads are used or the head number used is 3 or more.

Please check the mount data.

BACKLIGHT POSITION ERROR

1. Ensure all nozzles not in use are in station.

2. Ensure the sensor knows nozzles are there.

3. Push EMG sw. and pull up no.2 head to up-end, push

down no.1 head to lower pos.

4. In case the step 1-3 had not solved problem, Please

move backlight to right position by CHANGE BACKLIGHT

command.

NOZZLE CHANGE ERROR

Now, head is picking the component. Head can't change

the nozzle.

OPERATION ERROR

1. Ensure all nozzles not in use are in station.

2. Ensure the sensor knows nozzles are there.

3. Push EMG sw. Check the safety of head, nozzles,

nozzle station.

4. In case the step 1-3 had not solved problem, Please

ensure safety by manual.

NOZZLE STATION CLAMPING ERROR

Unable to clamp nozzles in the nozzle station.

Correct the condition of the nozzle station.

4-Point Fiducial Data Error

Fiducial No.5

Setting of [Type] is not correct. Please set like this,

No. 5 --> [4Local-M]

No. 6 --> [4Local-S]

4-Point Fiducial Data Error

Fiducial No.5

Setting of [Mark] is not correct. Please set same number.

4-Point Fiducial Data Error

Fiducial No.5

Distance between point and another point is too short.

Please set this distance more than 5(mm). Please set

coordinates of 4-point again.

(meaning)The nozzle intended for use is not in the nozzle station.

(cause)The nozzle which is planned for use has not been specified

in the nozzle station information.

(remedy)Check the settings in the nozzle station information.

(meaning)The nozzle station contains more than one of the same

nozzle.

(cause)Two of the same nozzle have been specified in the nozzle

station information.

(remedy)Check the nozzle station information.

(meaning)A head number of 3 or higher has been specified in the

mounting data for a mounter which has only two heads.

(cause)A head number of 3 or more has been specified.

(remedy)Change the head number in the placing data to 1 or 2.

(meaning)Vision recognition is specified with head 2.

(cause)With this machine, vision recognition cannot be carried out

using head 2.

(remedy)Change the head number to 1, or change to laser recog-

nition.

(meaning)The backlighting illumination is dangerously positioned.

(cause)When an attempt was made to change nozzles, the nozzles

could not be changed because the position of the backlighting illu-

mination was dangerous.

(remedy)Check to see that all of the nozzles are in the nozzle sta-

tion, and that the sensor reacts to all of the nozzles in the nozzle

station. Next, press the Emergency Stop button and move head 2

to its upper end and head 1 below the backlighting illumination

Then use the backlighting illumination movement command to move

the backlighting illumination to the right.

(meaning)The nozzle cannot be replaced because a component

has been picked up.

(cause)Two causes are possible: the head vacuum is on, or the

head vacuum is on and a component has been detected by the

vacuum level sensor.

(remedy)Remove the component from the nozzle or turn off the

head vacuum.

Accident happened for YV-120 machine Nozzle changing is failed.

According to the message and recover this accident

(meaning)Although the upper plate of the nozzle station slides and

two sensor for both edge (only single side for YVL80) detect the

actual action of the plate, at least 1 sensor do not response to the

command to slide the plate.

(cause)qPlate is mechanically stuck. The position or the sensitivity

of the sensor is not adjusted.

(remedy)Repair the sliding plate, or adjust the sensor.

Please set fiducial data according to "Error Message".

Please set 4 point fiducial data like shown in "Error Message".

Ea00233

Ea00234

Ea00235

Ea00236

Ea00237

Ea00238

Ea00239

Ea00240

Ea00241

Ea00242

Ea00243

Ea00244

Ea00245

4-Point Fiducial Data Error

Fiducial No.5

In quadrilaterals which is composed of 4-point fiducial,

distance between one point and one side of quadrilater-

als is less than 5(mm). Please set coordinates of 4-point

again.

4-Point Fiducial Data Error

Fiducial No.5

In quadrilaterals which is composed of 4-point fiducial,

there is interior angle which is over 180 degree. sage.

Please set coordinates of 4-point again.

4-Point Fiducial Data Error

Fiducial No.5

It is impossible to use this fiducial number which is se-

lected in this Mount Data, because this data is [4Local-

S]. Please use [4Local-M] Fiducial number of 4-point fi-

ducial.

4-Point Fiducial Data Error

Fiducial No.4

It is impossible to use this fiducial data, because this data

is [Note]. Please change from [Note] to [Exec].

PCB DATA ERROR

Mount data No.4

Fiducial data No.6

It is impossible to use this fiducial data, because this data

is [Note]. Please change from [Note] to [Exec].

4-Point Fiducial Data Errorpe Error

Mount data No. 6

Fiducial data No. 2

Coordinate of mount point is out of range of 4-point-fidu-

cial. to use this function in Please don't use this 4-point

fiducial for this mount point.

Data Warning

The piece of block that you defined in PCB Information is

different from piece of local badmark.

In this case, machine cannot count Block Numbers in

Production History. If you want to count Block Numbers,

change number of block in PCB Information.

PCB DATA ERROR

No mark data available for the local fiducial. Or the mark

data is not for fiducial.

Mount Data 1

Mark Data 2

PCB DATA WARNING

Height of component is out of range for "Multi Cam".

Component Data 2

It may be impossible to recognize this component by us-

ing "Multi.Cam". It is necessary to check whether this

component is able to be recognized by using "Multi.Cam"

in [ADJUST ASSISTANT]. To continue "Data-Check",

press any key.

MARK DATA WARNING

Templet image can't be downloaded to the vision.

•Did you create templet image of target mark?

•Don't you make too many mark data in one PCB?

•Don't you want to use too many kind of mark?

PCB DATA ERROR

Effective data was not found. There is no data to execute.

Use 'PASS'.

PCB DATA ERROR

There is no mark pattern data. Some pattern matching

function is used for fiducial mark, but it has no pattern

matching data. This data was made by executing of [Ad-

just Assistant] in Mark Information.

PCB DATA ERROR

This component body height is too high. So this compo-

nent is cannot recognize by equipped camera.

Mount Data 10

Component Data 5

Please set 4 point fiducial data like shown in "Error Message".

Set same number of block in PCB Information as total local badmark

number.

(meaning)The mark data for the specified not an fiducial does not

exist.

(cause)No mark data exists.

(remedy)Create the mark data.

(meaning)It may be impossible to recognized this component by

using "Multi.Cam" because height of this component is out of range

for "Multi.Cam"

(remedy)Please check recognition of this component in [ADJUST

ASSISTANT].

(meaning) No effective data in the PCB data.

(remedy) Use "PASS".

(meaning) There is no data for pattern matching.

(remedy) Make data for pattern matching of fiducial mark in mark

information.

(meaning) This component is too high for its height.

(remedy) Check camera coordinate data.