7OM-1625-004_w.pdf - 第16页
Safe-5 Safety Precautions 7OM-1603 2. Common Precautionary Items When there is a problem with the machine (SIGMA-G4/G5), locate the cause and assess the condition. Set the power breaker to "OFF". Afterthepr…
Safe-4
Safety Precautions
7OM-1603
2. Common Precautionary Items
1007-003
Notes on Machine Operation
Please keep the instruction manual in a safe place within reach.
Follow the instructions in the instruction manual for correct handling of the machine.
Be sure to fully understand the contents of the safety instructions in the instruction
manual and follow the instructions.
Please pay special attention to the precautionary items labeled on the machine or
described in the instruction manual and be sure to keep them. When the precautionary
items are ignored, it will result in personal injury or property damage (damage to the
machine).
Be sure to follow the operational instructions described in the instruction manual.
Do not modify the machine nor use any parts other than the specied ones for the
machine. Be sure not to use the machine with its safety devices detached. Doing
otherwise may cause personal injury.
Do not perform any operations other than those described in the instruction manual.
Whenever a problem arises, regarding the machine operations, performance, etc.,
please contact the marketing department or sales agency of Hitachi High-Technologies
for the solution.
This machine uses energetic driving systems and high voltage to run at high
speed. This power and voltage are high enough to cause a serious injury.
To avoid this danger, respect the following guideline.
Operate the machine with the covers being attached.
Before operating the machine be sure to close the magazine door.
Do not disengage the interlock mechanisms of the magazine door.
After performing setup operations with the magazine door being open, be
sure to close it securely.
Whenever you feel danger or abnormality, immediately press the
[EMERGENCY STOP] switch of the machine (SIGMA-G4/G5) to stop the
machine.
If the machine is kept running in abnormal condition, an accident or a
breakdown will result.
Safe-5
Safety Precautions
7OM-1603
2. Common Precautionary Items
When there is a problem with the machine (SIGMA-G4/G5), locate the cause
and assess the condition. Set the power breaker to "OFF".
Aftertheproblemhas
beenrectiedcompletely,resetthemachinetoits
normal condition.
When the tower light (green) of the machine (SIGMA-G4/G5) is ON or ashing, it
indicates that the static machine is in the "Automatic" mode (standby mode).
In case of a disaster of any kind, earthquake, storm, ood, re, or lightning,
immediately stop the machine (SIGMA-G4/G5) and turn off the power supply.
When the machine (SIGMA-G4/G5) stops due to a component pickup error
, be sure to
remove the miss-picked component from the feeder and start the automatic operation.
1007-003
Safe-6
Safety Precautions
7OM-1603
2. Common Precautionary Items
1003-002
Notes on Installation, Transfer and Maintenance
Do not install or transfer the machine on the customer side after shipment.
To ensure perfect operation of the machine, including safety and accuracy, only our
installation service department will install the machine or transfer it to another place.
Only the maintenance work on items described in this manual should be performed by
the customer. Please read the instruction manual carefully before maintenance work.
Do not perform any maintenance work on items that are not described in this manual.
Otherwise, not only breakdown of the machine but also personal injury may result.
When an alert label has deteriorated and become illegible, contact our service
department.
Only a well-trained service person should perform maintenance work carefully
through for the machine in compliance with the instructions.
Before maintenance work, set the power breaker of the machine (SIGMA-G4/
G5) to “OFF” and lock it with the padlock.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its substitute.
Residual voltages may remain behind for a few minutes in the internal devices
of the machine after power interception.
Before performing any maintenance work, be sure to wait for more than 10 minutes
until the DC power lamp and the charge lamp of the servo amplier turn "OFF" after
the power breaker of the machine (SIGMA-G4/G5) is set to "OFF".