7OM-1625-004_w.pdf - 第92页
7OM-1603 Chapter 2 : 3. Product Change Menu 2-23 3.2 "T est & T ch" Submenu TEST & TCH F7B24 1007-003 Graphic Development
7OM-1603
2-22
Chapter 2 : 3. Product Change Menu
1007-003
3. Product Change Menu
3.1 Outline of Product Change Menu
The following shows the hierarchical structure of the menus (including the
submenus and windows) for the Product Change Menu.
Note
The shadowed (gray) items are related to the multi-layer tray feeder.
"Setup" Window
"PP CHANGE" Window
"SPRT-PINS" Window
"PCB XFER" Window
"NOZ.CHG." Window
"Fdr Pick-up Tch" Window
"XY Beam Test" Window
"COMP RCG" Window
"PEC RCG" Window
"Tray Matrix Tch" Window
"Tray PU Pos Tch" Window
"PU Pos Ofst Tch" Window
"Test & Tch" Submenu
3.2.3
3.2.1
3.2.2
Reference Item Nos
Outline of Product Change Menu F7B23
7OM-1603
Chapter 2 : 3. Product Change Menu
2-23
3.2 "Test & Tch" Submenu
TEST & TCH F7B24
1007-003
Graphic
Development
7OM-1603
2-24
Chapter 2 : 3. Product Change Menu
3.2.1 "Tray Matrix Tch" Window
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[9]
[8]
[2]
[2]
[2]
"Tray Matrix Tch" window F7B25
[1] [Tray Select] Button
The tray to be taught is selected in this data box.
[2] Feeder No. Tray Set Display
The Feeder No., where the components are picked up, magazine, setup and
blocks are displayed in this pane.
[3] Tch Select
[Tray Zeroing Pos] Button
When this button is pressed, a teaching operation is performed to specify the
component data offsets X and Y.
[PU First], [PU Last] Button
Side Lengths X and Y and Pitches X and Y are determined according to the
taught rst and last takeout positions.
[4] Teach Mode
The following two types of teaching methods are provided and should be
selected according to the component size.
Teaching Operation with the [Center] Button
Normally, using this button, the component center is aligned with the screen
center and so the teaching operation is performed.
Teaching Operation with the [Corner1] and [Corner2] Buttons
When a component is large in size, these keys are used to align two points on
the component and a teaching operation is performed based on the alignment.
1007-002
Graphic
Development