7OM-1625-004_w.pdf - 第54页
7OM-1603 Chapter 1 : 3. Name of Each Section and Handling 1-13 Reel Holder Slot Section T raverse Section Cutter Unit Traverse Cart F7A2 Magazine (GS-MG100) F7A3 Pallet (GS-MP100) Tray Fixing Magnet (GS-MF100) Pallet and…
7OM-1603
1-12
Chapter 1 : 3. Name of Each Section and Handling
3. Name of Each Section and Handling
This feeder is constructed of an elevator unit, magazines, cutter unit, pallets a
JEDEC / FULL size traverse cart, and tray xing magnets.
WARNING
There are strong motorized and high-voltage areas
inside the machine. Special caution should be paid
not to touch them.
Doing otherwise will cause personal injury (serious
accident).
Onlyqualiedmaintenancepersonnelshould
detach the safety covers.
The machine should be operated with the covers
being attached.
If a safety cover is detached, be sure to reattach
it.
Be sure to close the magazine door before
operating the machine.
Do not disengage the interlock of the magazine
door.
Magazine #2 Ready
Ready Switch
Pallet Change Position
Ready Switch
Magazine #1 Ready
Ready Switch
Magazine #2 Supply Position
Upper Magazine
Change Position
Magazine #1 Supply Position
Lower Magazine
Change Position
Magazine Change Position
Elevator Power LED
Elevator
Magazine #2 Door
Pallet Change
Position Door
Handle
Magazine #1 Door
Safety Cover
Elevator Unit (Front Side of Machine) F7A1
1102-004
7OM-1603
Chapter 1 : 3. Name of Each Section and Handling
1-13
Reel Holder
Slot Section
Traverse Section
Cutter Unit
Traverse Cart F7A2
Magazine (GS-MG100) F7A3
Pallet (GS-MP100)
Tray Fixing Magnet
(GS-MF100)
Pallet and Tray Fixing Magnet F7A4
1003-002
7OM-1603
1-14
Chapter 1 : 3. Name of Each Section and Handling
3.1 Elevator Unit
The elevator is provided with a mechanism that moves the magazines up and
down.
The elevator can be loaded with two magazines in which the pallets are stored.
Each magazine is driven up and down separately.
The trays on the pallets in each magazine can be replenished with components or
the trays on each pallet can be reloaded with components at the specied position.
The magazines can manually be attached to or detached from the elevator.
The magazine loaded on the elevator is clamped with a spring force and positioned
in place.
Also, the elevator unit can be attached to any traverse cart.
WARNING
When the elevator unit is to be moved, pay
attentiontheinclinationoftheooranddifference
inlevel.Iftheoorisinclined10/1000mmormore,
the elevator might fall down, which might cause a
serious accident.
Notice
(a) Do not move the elevator unit with the tray components setup. Doing
so might scatter the tray components around.
(b) When the elevator unit is to be moved, hold the handle attached to
the cover side surface to move it.
[1] Elevator Power LED
[3] Upper [ALL CHANGE] Button and
Step No. Buttons ([1] through [15])
[3] Lower [ALL CHANGE] Button and
Step No. Buttons ([1] through [15])
[2] Magazine #2 Ready
Ready Switch
Handle
[2] Pallet Change Position Ready
Ready Switch
[2] Magazine #1 Ready
Ready Switch
F7A5
1102-004