00198500-02_VD_711.1_R18-1_DE_EN.pdf - 第2页

All names identified by ® are regi stered trademarks of the ASM Ass embly Systems GmbH & Co. KG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own p urposes could…

Station Software Version 711.1 (R18-1)

Software Version Description

Stationssoftware-Version 711.1 (R18-1)

Software-Versionsbeschreibung

Ausgabe 05/2018 Edition

All names identified by ® are registered trademarks of the ASM Assembly Systems GmbH & Co. KG. The

remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes

could violate the rights of the owner.

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information given in this publication is reviewed regularly and any necessary corrections are included in

subsequent editions.

ASM Assembly Systems GmbH & Co. KG Item-no.: 00198500-02

Rupert-Mayer-Strasse 44

81379 München

Germany

www.asm-smt.com

Alle mit dem Schutzrechtsvermerk ® gekennzeichneten Bezeichnungen sind eingetragene Marken der ASM

Assembly Systems GmbH & Co. KG. Die übrigen Bezeichnungen in dieser Schrift können Marken sein, deren

Benutzung durch Dritte für deren Zwecke die Rechte der Inhaber verletzen kann.

Wir haben den Inhalt der Druckschrift auf Übereinstimmung mit der beschriebenen Hard- und Software geprüft.

Dennoch können Abweichungen nicht ausgeschlossen werden, sodass wir für die vollständige Übereinstimmung

keine Gewähr übernehmen. Die Angaben in dieser Druckschrift werden regelmäßig überprüft und notwendige

Korrekturen sind in den nachfolgenden Auflagen enthalten.

ASM Assembly Systems GmbH & Co. KG Artikel-Nr.: 00198500-02

Rupert-Mayer-Straße 44

81379 München

Deutschland

www.asm-smt.com

Station Software 711.1 (R18-1) / Version Description 05/2018 Edition

Contents

1 Brief Description 5

2 Scope of Delivery 6

2.1 Software Components ......................................................................................... 6

2.2 Hardware Components ........................................................................................ 6

2.3 Languages ........................................................................................................... 7

3 Compatible Mode 8

4 Features of the 711.1 Station Software Version 9

4.1 SIPLACE TX V2 – New Placement Machine ....................................................... 9

4.1.1 Switching Off Cover Fan and Vacuum Pump Fan ............................................... 9

4.2 SIPLACE C&P20 P2 – New Placement Head ................................................... 10

4.3 SST48 and SST49 – New Camera Types ......................................................... 10

4.4 SIPLACE SmartFeeder Xi – New X-Feeders ..................................................... 10

4.5 Linear Dipping Unit 2 X – New Dipping Module ................................................. 10

4.6 Adjusting Z-Height of Vacuum Tooling .............................................................. 12

4.7 SIPLACE JTF-ML2 – Enhanced Functionality ................................................... 14

4.8 Multiple Road Runner Feeders – Improved Handling ........................................ 15

4.9 "The Hermes Standard" – Board Locking Process ............................................ 15

4.10 Front-Back-Offset Measurement........................................................................ 15

4.11 Checking GigE Camera Connections – Enhanced Functionality ....................... 16

5 Features of the 711.0 Station Software Version 17

5.1 "The Hermes Standard" – New Communication Protocol .................................. 17

5.2 New Placement Force – Very Low Force in Placement, Pickup and

Dipping Processes ............................................................................................. 18

5.3 SEMO CRF80 – New Tape Feeder ................................................................... 19

5.4 SIPLACE TX micron-Series – Teaching ............................................................ 19

5.5 Unique Machine Data for Quality Check ............................................................ 19

5.6 Enhanced Machine Endurance Run .................................................................. 19

5.7 Component Position Check ............................................................................... 20

5.8 Using Two Dip Modules for Dipping ................................................................... 21

5.9 Enhanced FCCS Tool ........................................................................................ 21

5.10 Enhanced SIPLACE Vision Functionality ........................................................... 22

6 Hardware Specifications 23

6.1 Supported Feeder Types ................................................................................... 23

6.2 Camera Systems and Component Ranges ....................................................... 24

7 ASM Software Environment 25

7.1 SIPLACE Pro Programming System Version 15.1 ............................................ 25

7.2 ASM OIS Version 15.1 ....................................................................................... 25

7.3 ASM Setup Center Version 9.3 .......................................................................... 25

7.4 ASM Traceability Version 5.4 SP1 ..................................................................... 26