00198500-02_VD_711.1_R18-1_DE_EN.pdf - 第4页
4 8 Restrictions 27 9 Corrected Errors 28 10 Important Terms and Abbreviations 36 11 Licenses 38
Station Software 711.1 (R18-1) / Version Description 05/2018 Edition
3
Contents
1 Brief Description 5
2 Scope of Delivery 6
2.1 Software Components ......................................................................................... 6
2.2 Hardware Components ........................................................................................ 6
2.3 Languages ........................................................................................................... 7
3 Compatible Mode 8
4 Features of the 711.1 Station Software Version 9
4.1 SIPLACE TX V2 – New Placement Machine ....................................................... 9
4.1.1 Switching Off Cover Fan and Vacuum Pump Fan ............................................... 9
4.2 SIPLACE C&P20 P2 – New Placement Head ................................................... 10
4.3 SST48 and SST49 – New Camera Types ......................................................... 10
4.4 SIPLACE SmartFeeder Xi – New X-Feeders ..................................................... 10
4.5 Linear Dipping Unit 2 X – New Dipping Module ................................................. 10
4.6 Adjusting Z-Height of Vacuum Tooling .............................................................. 12
4.7 SIPLACE JTF-ML2 – Enhanced Functionality ................................................... 14
4.8 Multiple Road Runner Feeders – Improved Handling ........................................ 15
4.9 "The Hermes Standard" – Board Locking Process ............................................ 15
4.10 Front-Back-Offset Measurement........................................................................ 15
4.11 Checking GigE Camera Connections – Enhanced Functionality ....................... 16
5 Features of the 711.0 Station Software Version 17
5.1 "The Hermes Standard" – New Communication Protocol .................................. 17
5.2 New Placement Force – Very Low Force in Placement, Pickup and
Dipping Processes ............................................................................................. 18
5.3 SEMO CRF80 – New Tape Feeder ................................................................... 19
5.4 SIPLACE TX micron-Series – Teaching ............................................................ 19
5.5 Unique Machine Data for Quality Check ............................................................ 19
5.6 Enhanced Machine Endurance Run .................................................................. 19
5.7 Component Position Check ............................................................................... 20
5.8 Using Two Dip Modules for Dipping ................................................................... 21
5.9 Enhanced FCCS Tool ........................................................................................ 21
5.10 Enhanced SIPLACE Vision Functionality ........................................................... 22
6 Hardware Specifications 23
6.1 Supported Feeder Types ................................................................................... 23
6.2 Camera Systems and Component Ranges ....................................................... 24
7 ASM Software Environment 25
7.1 SIPLACE Pro Programming System Version 15.1 ............................................ 25
7.2 ASM OIS Version 15.1 ....................................................................................... 25
7.3 ASM Setup Center Version 9.3 .......................................................................... 25
7.4 ASM Traceability Version 5.4 SP1 ..................................................................... 26
4
8 Restrictions 27
9 Corrected Errors 28
10 Important Terms and Abbreviations 36
11 Licenses 38
Station Software 711.1 (R18-1) / Version Description 05/2018 Edition
5
1 Brief Description
This document describes the 711.1 Version (R18-1) of the station software for SIPLACE®
machines. The Release-Tag displays in which ASM Release the current product has been
released. Example: (R18-1) –> 1. Release, 2018. The software was developed to run the following
placement machines:
– SIPLACE X2
– SIPLACE X3
– SIPLACE X4
– SIPLACE X4i
– SIPLACE X2 S
– SIPLACE X3 S
– SIPLACE X4 S
– SIPLACE X4 S micron
– SIPLACE X4i S
– SIPLACE X4i S micron
– SIPLACE SX1/SX2
– SIPLACE SX1/SX2 V2
– SIPLACE DX1/DX2
– SIPLACE CA4
– SIPLACE CA4 V2
– SIPLACE TX1/TX2
– SIPLACE TX2i
– SIPLACE TX2 micron
– SIPLACE TX2i micron
– SIPLACE TX2i micron 15 µm
– SIPLACE TX1/TX2 V2
– SIPLACE TX2i V2
Depending on the configuration, the software can be installed on one or two computers:
Standard – one computer with the following software components:
– Control Software
– SIPLACE Vision
– Graphical user interface, including SIPLACE Smart GUI (optional)
Optional – second computer with the following software component:
– Coplan computer software (COPLAN option)