00198500-02_VD_711.1_R18-1_DE_EN.pdf - 第37页
Station Software 71 1.1 (R18 - 1) / Versio n Description 05/2018 Edition 37 Twin VHF Very High Force Twin Head TX1/TX2/TX2i Machine type wit h 1 or 2 gantries and 1 PA TX1/TX2 V2 TX2i V2 Machine type wit h 1 or 2 gantrie…
Station Software 711.1 (R18-1) / Version Description 05/2018 Edition
36
10 Important Terms and Abbreviations
CA4
CA4 V2
Machine type of the Chip Assembly (CA)-series with 4 gantries
and 2 PAs
C&P Collect & Place
CPP Collect & Place & Pick & Place
DC Dual Conveyor
DX1/DX2 Machine type with 1 or 2 gantries and 1 PA
EDIF Electronic Design Interchange Format
eWLP embedded Wafer Level Process
FOPLP Fan-Out Panel Level Packaging
FCCS Field Camera Calibration System
GUI Graphical User Interface
HFH High Force Head
HW Hardware
MGCU Modular Gantry Control Unit
MHCU Modular Head Control Unit
MTC Matrix Tray Changer
OIS Operator Information System
PA Processing area
PCB Printed circuit board
Placement mode:
2-in-1
When a machine runs in I-Placement mode, it is possible to
perform manual operations for one side / gantry. This placement
mode is also called "independent".
Placement mode:
Alternating
Placement mode in a dual gantry placement area, in which both
gantries place components on both boards in a dual conveyor.
First, both gantries place all assigned components on the board
in lane one and then on the board in lane two.
Placement mode:
Borrow
Performance
A line runs in I-Placement mode and to get a balanced
throughput between the left and right conveyor lanes, e.g. the
last machine runs in Alternating mode and places components in
this placement area on the board of the other lane.
Placement mode:
I-Placement
Placement mode in a dual gantry placement area in which each
gantry only places components on the board of the assigned
conveyor lane.
SC Single Conveyor
SC SIPLACE Setup Center (external setup control system)
SW Software
SWS SIPLACE Wafer System
SX1/SX2 Machine type with 1 or 2 gantries and 1 PA
TH Twin Head
TH HF Twin Head High Force
Station Software 711.1 (R18-1) / Version Description 05/2018 Edition
37
Twin VHF Very High Force Twin Head
TX1/TX2/TX2i Machine type with 1 or 2 gantries and 1 PA
TX1/TX2 V2
TX2i V2
Machine type with 1 or 2 gantries and 1 PA
TX2 micron/
TX2i micron
TX2i micron 15 µm
Machine type with 2 gantries and 1 PA
VC Vision computer
VCU Vision Control Unit
VHF P&P Very High Force Pick&Place
WLFO Wafer Level Fan-Out, Chip Assembly process
WPC Waffle Pack Changer
X2/X2 S Machine type with 2 gantries and 2 PAs
X3/X3 S Machine types with 3 gantries and 2 PAs
X4/X4 S/
X4 S micron
Machine types with 4 gantries and 2 PAs
X4i/X4i S
X4i S micron
Machine types with 4 gantries and 2 PAs
Station Software 711.1 (R18-1) / Version Description 05/2018 Edition
38
11 Licenses
When using linear algebra, the SIPLACE station software utilizes the Eigen template library.
Eigen is free software and licensed under the GNU LGPL3+ (http://eigen.tuxfamily.org
).
The license terms for GNU LGPL3+ can be found on the station software product DVD in the
(License) directory.