00196376-0102_UM S-Feeder_EN.pdf - 第57页

Bulkcase Feeders Inserting the Murata Cassette Operating the Bulkcase Feeder User Manual SIPLACE S-Feeder 57 3.3.3 Inserting the Murata Cassette ► (1) Pre ss th e lo ck together and push upwa rds. The following diag ra m…

Bulkcase Feeders

Operating the Bulkcase Feeder Selecting Feeding Rails

56 User Manual SIPLACE S-Feeder

3.3 Operating the Bulkcase Feeder

3.3.1 Selecting Feeding Rails

►Select the appropriate feeding rail for the component base and height.

3.3.2 Placing the Feeding Rails on the Body

►(1) Place the feeding rail down on the body so that the contacts are above one another.

►(2) Hook the quick-fit closure onto the fixture pin of the feeding rail.

►Close the quick-fit closure by pressing the lever down.

►(3) Fix the front end of the feeding rail by turning the locking screws 90° in a clockwise direction.

Legend:

1 Base of component

2 Height of component

Bulkcase Feeders

Inserting the Murata Cassette Operating the Bulkcase Feeder

User Manual SIPLACE S-Feeder 57

3.3.3 Inserting the Murata Cassette

►(1) Press the lock together and push upwards. The following diagram (2) shows the lock when open.

►(3) Place the closed Murata cassette onto the funnel, with the opening facing downwards, and push

the lock down again.

►(4) Open the Murata cassette, by pushing the slide upwards.

►(5) Press the button at the back of the feeder 1x. The components will be moved forwards to the pick-

up position.

Bulkcase Feeders

Operating the Bulkcase Feeder Replacing the Empty Murata Cassette

58 User Manual SIPLACE S-Feeder

3.3.4 Replacing the Empty Murata Cassette

►(1) Check the prism (A), to make sure that there are no components in the transition area between

the funnel and the Murata cassette.

►(2) Press the lock together, push upwards and remove the empty Murata cassette.

Perform the further steps as described in "3.3.3 Inserting the Murata Cassette" [ ➙ 57]:

►Place the new, closed Murata cassette onto the funnel, with the opening facing downwards, and push

the lock down again.

►Open the Murata cassette, by pushing the slide upwards.

►Press the button at the back of the feeder 1x. The components will be moved forwards to the pickup

position.