00197197-01_IM_SetupCenter5.0_EN.pdf - 第82页

Installation Steps to Perform After Installation Motorola / Symbol MC70/MC75 Scanner Configuration 82 Installation Manual SIPLACE Setup Center 5.0 4.4.4 Motorola / Sym bol MC70/MC75 Scanner Configuration 4.4.4.1 Configur…

100%1 / 100
Installation
Datalogic Scanner Configuration Steps to Perform After Installation
Installation Manual SIPLACE Setup Center 5.0 81
4.4.3.4 Changing the Cradle Address
If you want to change the cradle address in the future, you should notify that all previously connected
scanners will be disconnected. You have to reconfigure them again.
► Click “Start” to continue.
► Click “Yes” to confirm the change.
Installation
Steps to Perform After Installation Motorola / Symbol MC70/MC75 Scanner Configuration
82 Installation Manual SIPLACE Setup Center 5.0
4.4.4 Motorola / Symbol MC70/MC75 Scanner Configuration
4.4.4.1 Configurate Setup Center
The communication between Setup Center and scanner is achieved by network connection (socket).
Setup Center takes the role of the server and the scanner that one of the client.
Start Setup Center and open the setting via Tools -> Settings. Within the group Scanner the following
entry is now visible:
Activate the interface by selecting "Active". Check the fire wall settings whether the port chosen by Setup
Center is enabled and correct it if necessary. To accept the settings close the configuration dialog with
"OK".
4.4.4.2 Configure Setup Center Client
After the installation routine has restarted the scanner the Setup Center Client is started automatically.
NOTICE
Please configurate the barcode scanner for the operation within WLAN network - as described
in document Installation Manual WLAN Infrastructure for SIPLACE (item no. 00197199-xx).
Installation
Motorola / Symbol MC70/MC75 Scanner Configuration Steps to Perform After Installation
Installation Manual SIPLACE Setup Center 5.0 83
► Open the configuration dialog via File->Settings.
► Type the IP-address/name of the PC where Setup Center is installed.
► Enter the port for which the scanner interface is configurated (default:7575).
► Configurate the volume of the buzzer. The buzzer gives accustical feedback in operation mode of
Setup Center.