00197197-01_IM_SetupCenter5.0_EN.pdf - 第87页
Installation Motorola / Symbol MC70/MC75 Scanner Configuration Steps to Perfo rm After Installation Installation Manual SIPLACE Setup Center 5.0 87 You can change the following scan para meters here: ▪ Aiming Duration (m…
Installation
Steps to Perform After Installation Motorola / Symbol MC70/MC75 Scanner Configuration
86 Installation Manual SIPLACE Setup Center 5.0
► Choose the language from list.
► Press Continue to proceed.
Installation
Motorola / Symbol MC70/MC75 Scanner Configuration Steps to Perform After Installation
Installation Manual SIPLACE Setup Center 5.0 87
You can change the following scan parameters here:
▪ Aiming Duration (ms):
Sets the time, how long a user is able to target a barcode with target laser.
▪ Focus Position:
– Far: You have to focus a barcode in scan range of about 23 cm (9 inches).
– Near: You have to focus a barcode in scan range of about 13 cm (5 inches).
▪ Allow poor printed 1D barcodes (slow rate scanning):
Use this setting, if most of your barcodes cannot be read in case of light damage.
► Press Ok or Apply to save the settings.
Setting 1D or 2D barcodes for MC70 Scanner
► Choose the allowed 1D barcodes for your MC70 Scanner here.
NOTICE
This setting is depending on barcode size. If you have problems to read your 1D barcodes with
small size, change the setting to “Near”.
Installation
Steps to Perform After Installation Motorola / Symbol MC70/MC75 Scanner Configuration
88 Installation Manual SIPLACE Setup Center 5.0
► Right click on a barcode to open the context menu:
⇨ Edit: Additional barcode settings
⇨ All Off: Select none of the barcodes in the list
⇨ All On: Select all the barcodes in the list
► If there is no addional settings for this barcode available, press Ok to close the window.
► Press Ok or Apply to save the settings.
► Choose the allowed 2D barcodes for your MC70 Scanner here.