00197197-01_IM_SetupCenter5.0_EN.pdf - 第85页
Installation Motorola / Symbol MC70/MC75 Scanner Configuration Steps to Perfo rm After Installation Installation Manual SIPLACE Setup Center 5.0 85 4.4.4.4 SIPLACE Scanner Config Tool Scanning problems with 1D barcodes I…
Installation
Steps to Perform After Installation Motorola / Symbol MC70/MC75 Scanner Configuration
84 Installation Manual SIPLACE Setup Center 5.0
► Here you can set a password to prevent modification on the scanner configuration.
For the first editing of the configuration the password is empty. In this case safety is deactivated. You
can set a password now. By confirmation with "OK" all settings were saved.
4.4.4.3 Establishing Connection
► Start Setup Center.
► Click on "Connect" to establish a connection to Setup Center.
In case the connection fails check the network settings again.
The software is now successfully configured.
Installation
Motorola / Symbol MC70/MC75 Scanner Configuration Steps to Perform After Installation
Installation Manual SIPLACE Setup Center 5.0 85
4.4.4.4 SIPLACE Scanner Config Tool
Scanning problems with 1D barcodes
If the MC70/MC75 is unable to scan most of your 1D barcodes, use the following configuration utility, to
resolve the problems.
► Please exit all running applications on scanner and Symbol AppCenter to continue.
Legend
1. MC 70
2. MC 75
► Select Start->Programs to show present applications on scanner.
Legend
1. MC 70
2. MC 75
► Select SIPLACE Scanner Config Tool to continue.
Installation
Steps to Perform After Installation Motorola / Symbol MC70/MC75 Scanner Configuration
86 Installation Manual SIPLACE Setup Center 5.0
► Choose the language from list.
► Press Continue to proceed.