FRITSCH Pick and Place machine.pdf - 第24页
24 Softwar e options P ANetState All machine messages are transf err ed to a separate PC on the network and displa yed ther e. The user is informed i.e. if production is nished and can initiate further steps. P AAcousti…
23
Software options
PATrace
This module documents which component from
which lot has been used on which circuit board and
with which order. This enables historical production
runs to be interrogated, in case of a recall enquiry.
PAStatistics
To calculate an order, all available data such as assembly
time per circuit board is documented and analyzed by
this module.
PAStorage
This module manages all SMD parts, circuit boards and
other components used in production (like heat sinks
or other standard parts) that you have in stock. The
assembled components are debited from the stock
automatically as they are used. The user is informed by
settable minimum stock levels, whether a stock item has
to be reordered.
PAStorage distinguishes between the whole warehouse
and the parts currently stored on the machine.
PABarcode
All smartFEEDERs can be set up using a wireless
barcode reader. Together with the warehousing
module you can read out the current stock. By using
the reader for a setup, it is ensured that the correct
component is set up on the correct feeder.
24
Software options
PANetState
All machine messages are transferred to a separate
PC on the network and displayed there. The user is
informed i.e. if production is nished and can initiate
further steps.
PAAcoustics
The sound module PAAcoustics early informs the user
about the end of production. Needed preparations can
be started without stopping the process.
PALevel
For assembling of MID interconnect device the module
„Z-Level“ can be integrated. This module enables the
placing of components on different levels - on higher
and deeper levels. So the module is useful for placing
components on interconnect device like for example
Embedded Components in PCBs.
PAJob
As production setups or change-over times are the
most cost-intensive activities, PAJobs analyzes which of
the predened orders takes least time to set up and
suggests it to the user for production.
PA-LEDpairing
The optional software-module PA-LEDpairing has been
developped to combinate LED to resistor. So the manual
assignement isn’t longer necessary and errors can be
avoided.
25
The placeALL
®
range of fully automatic machines offers
the right feeder for every SMD model.
The feeder system includes feeders for rolls, sticks,
trays and for loose components and is available for all
automatic machines.
Coloured grips for
better distinction of
the tape width
Automatic recognition
When plugging in a smartFEEDER, the feeder is
automatically logged in to the system. In this event, not
only the data of components are automatically passed
on to the feeder but also the picking positions. The
system log-in takes only a few milliseconds. Thereby it
doesn’t matter which feeder slot or to which side of the
machine the smartFEEDER is plugged into.
The pick & place machine immediately knows the
picking position and its feeding program is automatically
adapted to the new feeder without intervention of the
operator. Empty feeders can thus be replaced during the
current feeding.
Automatic pick & place correction
The serial software module automatic pick&place
correction (APC) continuously monitors the picking
position from the feeders. In the event that the picking
position is not correctly calibrated or the picking
position of a belt changes slightly during assembly, then
this module will automatically adjust the picking
position and the stability of placement/assembly will be
signicantly increased.APC applies a statistical
procedure for the correction of the picking positions.
Therefore, individual outliers do not cause a faulty
correction. The APC is part of the software of the fully
automatic machine of the placeALL
®
-series.
Feeder systems
smartFEEDER
Especially in the case of smaller and medium-sized lot
sizes, the feeder system has to be exible and absolutely
safe to guarantee high quality at low costs. All the
information about the assembled components is stored
in the smartFEEDER itself.
plug-in log in assemble
0ms 50 ms 100 ms