FRITSCH Pick and Place machine.pdf - 第29页

29 F eeder stora g e rack The feeder tr olle y mak es it possible to safel y stor e all feeder units that ar e not r equir ed for the curr ent assembly pr ocess near to the placement machine. Whilst the machine is pr odu…

Tape-strip feeder

When assembling prototype runs, tape-strips are often

used. With this feeder, up to eleven 8 mm strips (or

fewer, but wider strips) can be fed simultaneously.

Tray holder

Multiple tray holder per one JEDEC tray can be used

inside the placement area.

Thus the placement area of the Pick & Place machine can

be adapted easily to different projects and tasks.

Tray for loose components

The loose-component feeder for the placeALL

includes

36 pickup positions.

Every tray has a clear cover, to keep the components

shield and clean from dust.

IC FEEDER

25 different ICs can be equipped on the IC feeder.

Therefore it has inserts with three different widths for

different applicable components.

These inserts can be adjusted on custom made projects.

Feeder systems

trayFEEDER

• up to 8 Jedec-Trays

• automatic supply of the right component while

assembling

• integration in the operating interface

• retrot at existing machines

• mechanical linked with the machine for solid taking

• operating of Trays in any order – no subscription

• integrated controller of axis for gentle motion of

the high-value components

All these feeders can be placed in the assembling area by magnetic bases.

Holder for high component tapes

The Universal-Tape-Strip-Holder is suitable for compo-

nent tapes up to 27 mm height. Built for the use of tapes

with a width from 8 to 56 mm.

Feeder storage rack

The feeder trolley makes it possible to safely store all

feeder units that are not required for the current

assembly process near to the placement machine. Whilst

the machine is producing, the operator can already get

the feeders needed for the next project on the feeder

trolley. After product change the feeder are simple

plugged from the trolley to the machine.

The different racks make it possible to stock up all

materials, like rolls, tubes or small components needed

for production. The mounted wheels allow an easy and

smart moving of the trolley.

The feeder trolley has the following racks:

2 x racks with 25 slots for feeders

1 x rack for small parts

All in all, the routes to be made can be shortened,

flexibility increased and the operator relieved.

Table feeder storage

Portable or at the working place mountable feeder com-

partments enable the solid and vertical storage of feeder

which are not in use at the machine.

Feeder set-up stations

An external feeder set-up station enables a set-up of

feeders irrespective of the machine. Thereby the set-up of

a new project can be carried out at the same time as the

current project is still being assembled.

Feeder racks

Feeder racks are required to use tape or tube feeders

on the machine. Each rack ensures the communication to

the individual feeders. Depending on the type of

machine, different feeder racks can be mounted.

Feeder adapter

The feeder adapter allows the use of belt and bar

feeders using a sub-D connection on present machines.

The adapter allows the set-up of the feeders in the

software and thereby emulates the additional functions

on present machines.

Feeder systems

Conveyor systems

Fast and easy

Especially in small series the stand- and changeover

times should be reduced to a minimum. Therefore the

conveyor of the placeALL® range was optimized. The

justage of the PCB width as well as the positioning of the

supporter pins below the circuit can be done without

tools. Depending on application and local conditions the

best conveyor for optimal transportation can be chosen:

• 1 Zone-Conveyor

• 3 Zone-Conveyor

• Batch-Conveyor from left or right

SMEMA Interface

Each conveyor has the standard SMEMA interface. Thus,

machines can easily be integrated into any production

lines or even combined with a loader and unloader to

automate partial the pick & place process.

Stressless motion

To bring sensitive PCBs such as ceramic subtrates

or partial assembled PCBs safely to the placement

position, the PCBs are slowly moved through a ramp

of deceleration to the stopper and so the mechanical

load is reduced to a minimum. All conveyors are fully

programmable. The rate of feed, ramps and waiting times

can be adapted to the application.

Customization

By request the conveyor can be equipped with a

customized intake for workholding xture. This enables

to handle even heavy or customized workholding xture

in the placeALL

Standalone

Batch-System

Inline-System