FRITSCH Pick and Place machine.pdf - 第26页

26 tapeFEEDER All t ap eF EE DE R are smar t FE ED ER . They have an e asily acce ssibl e control pa nel for t he manu al infee d and out fee d, a s t atus ind icatio n wit h 2 LED s as well a s the ser ies num ber w ith…

The placeALL

range of fully automatic machines offers

the right feeder for every SMD model.

The feeder system includes feeders for rolls, sticks,

trays and for loose components and is available for all

automatic machines.

Coloured grips for

better distinction of

the tape width

Automatic recognition

When plugging in a smartFEEDER, the feeder is

automatically logged in to the system. In this event, not

only the data of components are automatically passed

on to the feeder but also the picking positions. The

system log-in takes only a few milliseconds. Thereby it

doesn’t matter which feeder slot or to which side of the

machine the smartFEEDER is plugged into.

The pick & place machine immediately knows the

picking position and its feeding program is automatically

adapted to the new feeder without intervention of the

operator. Empty feeders can thus be replaced during the

current feeding.

Automatic pick & place correction

The serial software module automatic pick&place

correction (APC) continuously monitors the picking

position from the feeders. In the event that the picking

position is not correctly calibrated or the picking

position of a belt changes slightly during assembly, then

this module will automatically adjust the picking

position and the stability of placement/assembly will be

signicantly increased.APC applies a statistical

procedure for the correction of the picking positions.

Therefore, individual outliers do not cause a faulty

correction. The APC is part of the software of the fully

automatic machine of the placeALL

-series.

Feeder systems

smartFEEDER

Especially in the case of smaller and medium-sized lot

sizes, the feeder system has to be exible and absolutely

safe to guarantee high quality at low costs. All the

information about the assembled components is stored

in the smartFEEDER itself.

plug-in  log in  assemble

0ms 50 ms 100 ms

tapeFEEDER

All tapeFEEDER are smartFEEDER. They have

an easily accessible control panel for the manual

infeed and outfeed, a status indication with 2

LEDs as well as the series number with bar code,

through which the feeder can also be equipped

with a bar code scanner. The feeders can pick

up rolls up to 8” by default. With extensions 13“

rolls can be handled.

Technical details:

• 8 mm - 72 mm tape width

• for blister- and paper tapes

• direction change tapes Ø=64mm

• microprozessor controlled

• high speed communication

• redundant plug

blockFEEDER

The use of blockFEEDER can facilitate a space saving

set-up of the components to, for example, implement

a standard set-up, during which standard components

remain always mounted on the machine.

Only a few project specic components must be

retrotted.

• Processes 10 x 8 mm tapes with Ø 180 mm

optional 5 x Ø 180 mm and 5 x 330 mm

• max. thickness of the tape 1.1 mm; max. height of the

tape 1.6 mm

• Dimension from the tape to the border of the tape

min. 1 mm

vibrations tubeFEEDER

Both the amplitude as well as the frequency can be

adjusted on the stick feeder. This allows an optimal

adjustment of the infeed to the set-up components.

The vibration starts automatically by removing the

components and stops automatically after a set length of

time. This ensures that sufcient components are always

available.

Feeder systems

threading

control panel

roller support

seperable peel slot

empty tape fee-

ding

coloured grip for

better distinction

redundant

contacting

highly precise

base body

control

panel

roller support

peel slots

tape guide

domeFEEDER

For the production of keypads feeder for the support

of domes are available. The feeder are useable for all

standardized domes. We can also implement customized

solutions.

ledFEEDER

There are feeders for assembling THT LEDS available for

all machi nes of the placeALL

series. These feeders feed

the LEDs from stan dard reels, cut the wires and place

the LEDs in the right position for assembly. The length of

the wires can be adjusted with corresponding adapters

to any size.

FEEDERtyp Order number Slots Tape width

Tape depth



Rack-Position Notes

tapeFEEDER 908.121.008 1 8 mm 6 mm all

half step for

0402 / 0201

tapeFEEDER 908.120.008 1 8 mm 6 mm all

tapeFEEDER 908.120.012 1 12 mm 6 mm all

tapeFEEDER 908.120.013 2 12mm 13 mm all

tapeFEEDER 908.120.016 2 16 mm 13 mm all

tapeFEEDER 908.120.024 2 24 mm 13 mm all

tapeFEEDER 908.120.032 3 32 mm 13 mm all

tapeFEEDER 908.120.044 3 44 mm 13 mm all

tapeFEEDER 908.120.056 4 56 mm 13 mm all

tapeFEEDER 908.120.072 4 72 mm 13 mm all

blockFEEDER 908.160.008 5 8 mm 3 mm all

for 10×8 mm-

tape

tubeFEEDER 908.121.002 5 - - all for 10×SO08

trayFEEDER 908.170.410 13 - -

machine-specic

for 8 x JEDEC

Tr ay

 Please take note of the bending radius.

Feeder systems

labelFEEDER

The FRITSCH labelFEEDER allows an exact label

transport to the picking position of the pick&place

machine. A fast setup is guaranteed by the well-arranged

four-button control panel and the wide range of label-

and tape sizes tting to the feeder. Together with the

compact dimensions of the unit a highly efcient labeling

solution was created.