cp642规格书.pdf - 第11页
3.4 W arranty • Warranty period 2000 hours or 1 year. Fuji will bear no responsibility for damage due to acts of nature (fire, flood, earthquakes, etc) or incorrect operation. – 8 – CP-642(E) Specifications 2.0 3. Machin…
3.3 PCB Requirements
(1) Board Size
• 356 mm (W) x 457 mm (L) maximum
• 50 mm (W) x 80 mm(L) minimum
• Thickness 0.5 mm – 4.0 mm
Note: Consult Fuji if board backup is required.
(2) Board Material
• Glass epoxy, composites, paper phenol, alumina, polyimide, etc.
(3) Board Restrictions
• Warpage: ±1.0 mm maximum
• Height of premounted parts: 6.0 mm maximum
• Height of premounted bottom side parts: 25.4 mm
– 7 – CP-642(E) Specifications
2.0
3. Machine Specifications
3.4 Warranty
• Warranty period 2000 hours or 1 year. Fuji will bear no responsibility for
damage due to acts of nature (fire, flood, earthquakes, etc) or
incorrect operation.
– 8 – CP-642(E) Specifications
2.0
3. Machine Specifications
4. Placing Heads
4.1 Placing Heads
Station Function
1 Pick-up part from the D-table
2 Part detection (large part only)
3Pθ: Placement angle pre-rotation in 90 degree angles
4 Idle
5 θ−axis nozzle rotation
6 Vision processing
7 Idle
8 Idle
9 Idle
10 Fθ: Fine placement angle rotation (incl. adjustment)
11 Placement
12 FRθ:Fθ: Fine rotation origin return
13 PRθ:Pθ: Pre-rotation origin return (cam driven)
14 A-head detection
15 Nozzle clutch origin detection
16 NG parts discarded
17 Detection of nozzle type No. 1 - No. 6
18 Nozzle change
19 Nozzle change check (detect type No. 1 - 6)
20 Idle
– 9 – CP-642(E) Specifications
2.0