cp642规格书.pdf - 第17页
– 14 – CP-642(E) Specifications 1.0 6. Parts Supply System (7) Feeder Stands • A feeder stand is a 3-tier shelf designed to accommodate unused or spare feeders. Shelves can be selected from the following list and attache…
6. Parts Supply System
6.1 Parts Supply Table (D-axis) and Tape Feeders
(1) Types of Components 140 types (using 70 x 2 tables with 8 mm feeders)
(2) Placeable Components Components that comply with the packaging, feed
pitch and parts height requirements as previously
outlined.
(3) Table Drive Method 2 motor/2 independent drive mechanisms.
(4) D-table Drive Modes May be selected from the following
• Device Change Mode
• Changeover Mode
• Joint Mode
(5) Feeder Pitch
Note: The expressions "left side" and "right side" refer to the feeder mounting positions when
viewed from the rear of the machine.
(6) Feeder Types (which can be placed at the ends of the device tables)
W8 W12
N/A
N/A
N/A
N/A
D1
D70
D71
D140
√
√
√
√
W16
N/A
N/A
N/A
N/A
W24
N/A
N/A
N/A
N/A
W32
N/A
N/A
N/A
N/A
W8
W12
W16
W24
W32
W8
1P
2P
2P
2P
2P
W12
2P
2P
2P
2P
3P
W16
2P
2P
2P
2P
3P
W24
2P
2P
2P
3P
3P
W32
2P
3P
3P
3P
3P
Left side
Right side
– 13 – CP-642(E) Specifications
1.0
– 14 – CP-642(E) Specifications
1.0
6. Parts Supply System
(7) Feeder Stands
• A feeder stand is a 3-tier shelf designed to accommodate unused or spare feeders.
Shelves can be selected from the following list and attached to the stand.
(8) List of CP642/CP642(E) Compatible Feeders
For 330 mm reel
WD-0804-1.0-330
WD-0804-1.3-330
WD-0804-1.8-330
WE-0804-1.0-330
WE-0804-1.3-330
WE-0804-1.8-330
WE-1204-2.5-330
WE-1208-2.5-330
WE-1212-2.5-330
WE-1604-3.7-330
WE-1608-3.7-330
WE-1612-3.7-330
WE-2404-5.0-330
WE-2408-5.0-330
WE-2412-5.0-330
WE-2416-5.0-330
WE-2424-5.0-330
WE-3212-7.0-330
WE-3216-7.0-330
WE-3224-7.0-330
For 380 mm reel
WE-1204-2.5-380
WE-1208-2.5-380
WE-1212-2.5-380
WE-1604-3.7-380
WE-1608-3.7-380
WE-1612-3.7-380
(12 mm Double feeding)
(12 mm Double feeding)
For 180 mm reel
WD-0802-0.7-180
WD-0804-1.0-180
WD-0804-1.3-180
WD-0804-1.8-180
WE-0802-0.7-180
WE-0804-1.0-180
WE-0804-1.3-180
WE-0804-1.8-180
WE-1204-2.5-180
WE-1208-2.5-180
WE-1212-2.5-180
Feeder Stand
Holds 8, 12 mm
Holds 16 mm
Holds 24 mm
Holds 32 mm
(3 Shelves/ Stand)
(accommodates 34 feeders)
(accommodates 27 feeders)
(accommodates 22 feeders)
(accommodates 19 feeders)
Notes: (1) Both 330 and 380 diameter reels can be mounted on reel holders. The
feeding capacity is a maximum 10,000 parts at 4 mm/pitch and a maximum
5,000 parts at 8 mm/pitch.
(2) A part is fed by a single stroke for a pitch of 2, 4, 8, 12 and 16 mm, and by
multiple strokes for a pitch up to 24 mm.
(24 mm is the maximum length of tape which can be cut off.)
(3) 380 diameter reel holders are manufactured on demand.
(4) The reel's alphanumeric number includes the applicable nozzle size. The
size is the maximum nozzle diameter. Nozzles of smaller diameter can be
used on the feeder as well.
(5) All FCP-6 dedicated feeders are made of aluminum.
(6) The dimensions of the W8, 13-inch parts reel are shown below.
Feeders for the CP6 use a box-type reel holder, providing structural stability
which ensures repeated component pick-up accuracy.
– 15 – CP-642(E) Specifications
1.0
6. Parts Supply System