cp642规格书.pdf - 第26页
10. Equipment Overview 10.1 Exterior Schematic 10.1.1 Models with Rear Cover – 23 – CP-642(E) Specifications 2.0
9.2.10 Tri-color Signal Tower
(1) Customer selectable green or blue lights with standard red and yellow
lights.
9.2.11 HELPS Specifications
(1) The HELPS system provides an in-line production system that supports
automatic changeover. The main features are as follows:
• Automatic changeover of production programs
• Automatic conveyor width adjustment
• Displays confirmation items and manual procedure instructions for
automatic changeover operation.
(2) The level of automation varies according to the customer's specification .
• Board type (barcode or pattern-code) trigger.
• Manual (operation SW) trigger
Note: When a barcode or pattern-code is used as a trigger, a separate unit to
read data at the previous stage is required. Details are available
separately.
9.2.12 F4G System
(1) The F4G system performs data communication with the machine using the
following:
• Computer (IBM PC compatible )
• C/C (communication center)
• Program modules (F4GO, F4GP, F4GM, etc. as required)
(2) Refer to the the separate “F4G Specifications” for details.
Note: The PC for the F4G system should be prepared by the customer prior to
the installation of the machine.
9.2.13 Other Requirements
(1) Any requirements not covered in these specifications may be discussed
separately.
(2) If you have any questions, please contact Fuji or one of our sales
representatives.
– 22 – CP-642(E) Specifications
1.0
9. Options
10. Equipment Overview
10.1 Exterior Schematic
10.1.1Models with Rear Cover
– 23 – CP-642(E) Specifications
2.0
10.1.2Models with Fence
– 24 – CP-642(E) Specifications
2.0
10. Equipment Overview