cp642规格书.pdf - 第5页

• An expanded backup pin area has eliminated the restrictions on backup positions that existed on the XY-table on previous models. Also, the CP-642/CP-642(E) easily meets the requirements to load PC boards of 0.5 mm thic…

1. Outline

1.1 Outline

The CP-642/CP-642(E) is a reliable, high-speed automatic component placement machine

which places the smallest chips to the larger electronic components on high-density

printed circuit boards.

The machine performs placing at a maximum speed of 0.09 sec/shot and can be loaded

with up to 140 types of parts. Furthermore, the XY-table speed has been increased on this

model.

To further reduce noise the machine has been equipped with a rear cover which fully

encloses the device tables.

1.2 Features

• The CP-642/CP-642(E) achieves the world’s fastest placing speed, 0.09 sec/shot, in

the one-by-one chip shooter category. The CP-642/CP-642(E) exhibits an

improvement of 25 to 30% in throughput compared with the CP IV-3 and an

improvement of 10% compared with the CP-6.

• Computerized design analysis has resulted in a rigid machine structure. This rigid

structure, along with high-accuracy mechanical parts, endows the

CP-642/CP-642(E) with the highest possible placement accuracy.

• The simple placing head, consisting of six nozzles per head, expands the number of

possible nozzle variations and facilitates maintenance.

• A high-speed vision processing system utilizing gray scale technology provides

reliable and accurate placement results.

• Press-in type tape feeders reduce the changeover time drastically. Increased rigidity

for 13 and 15-inch reel holders minimizes feeder vibration thereby guaranteeing

stable tape feed.

• The newly designed rear cover for the D-axis table reduces the noise generated by

the D-axis feeders from 82 dB to 76 dB, and so improves the working environment.

• The Windows-based F4G (Fuji 4th Generation software) line management system

controls the production line with high efficiency. F4G features user-friendly

operation allowing even beginners to utilize it.

Note: The CP-642/CP-642(E) does not include F4G. The F4G software must be

purchased separately. See the F4G specifications document for details.

– 1 – CP-642(E) Specifications

2.0

• An expanded backup pin area has eliminated the restrictions on backup positions

that existed on the XY-table on previous models. Also, the CP-642/CP-642(E) easily

meets the requirements to load PC boards of 0.5 mm thickness.

• The new loading system employs servo motors to control the PCB lifter rather than

the air cylinders used on previous models.

This system allows the CP-642(E) to shorten the PCB loading and unloading time

(reduced from 5 to 4 sec) and control acceleration/deceleration for shock-free

placement.

– 2 – CP-642(E) Specifications

2.1

1. Outline

2. Environmental Specifications

2.1 Electrical Power and Air

• Voltage: 3-phase 200 VAC ±10%

• Frequency: 50/60 Hz

• Power consumption: 10 KVA

Notes:

(1) Input voltage: Selectable from 200, 210, 220, 230, 380, 400, 415, 460 and 480 V

(by selecting the transformer taps)

(2) An exclusive power source should be used for the machine in order to avoid problems from

noise, fluctuations in voltage, and high-frequency distortion.

(3) Compressed air: 0.5 MPa (5 kgf/cm

)

(4) Air consumption: 50 Nl/min

2.2 Environmental Conditions

• Ambient temperature : 15 to 35° C

• Ambient humidity : 30 to 80 %

• Protection Structure : Class IP22 equivalent

2.3 Machine Weight

Approximately 6000 kg (excluding the D-axis rear cover)

2.4 Machine Monitor

Either Japanese or English.

– 3 – CP-642(E) Specifications

2.0