cp642规格书.pdf - 第4页
1. Outline 1.1 Outline The CP-642/CP-642(E) is a reliable, high-speed automatic component placement machine which places the smallest chips to the larger electronic components on high-density printed circuit boards. The …
8. Machine Control System................................................................18
8.1 Machine Control Specifications ..................................................................18
8.2 Signal Tower...............................................................................................19
9. Options ............................................................................................20
9.1 Installation of Optional Parts and Functions...............................................20
9.2 Further Information.....................................................................................20
10.Equipment Overview ......................................................................23
10.1 Exterior Schematic......................................................................................23
10.2 Leveling Position.........................................................................................25
10.3 Electrical and Pneumatic Inlets...................................................................26
– ii – CP-642(E) Specifications
2.0
1. Outline
1.1 Outline
The CP-642/CP-642(E) is a reliable, high-speed automatic component placement machine
which places the smallest chips to the larger electronic components on high-density
printed circuit boards.
The machine performs placing at a maximum speed of 0.09 sec/shot and can be loaded
with up to 140 types of parts. Furthermore, the XY-table speed has been increased on this
model.
To further reduce noise the machine has been equipped with a rear cover which fully
encloses the device tables.
1.2 Features
• The CP-642/CP-642(E) achieves the world’s fastest placing speed, 0.09 sec/shot, in
the one-by-one chip shooter category. The CP-642/CP-642(E) exhibits an
improvement of 25 to 30% in throughput compared with the CP IV-3 and an
improvement of 10% compared with the CP-6.
• Computerized design analysis has resulted in a rigid machine structure. This rigid
structure, along with high-accuracy mechanical parts, endows the
CP-642/CP-642(E) with the highest possible placement accuracy.
• The simple placing head, consisting of six nozzles per head, expands the number of
possible nozzle variations and facilitates maintenance.
• A high-speed vision processing system utilizing gray scale technology provides
reliable and accurate placement results.
• Press-in type tape feeders reduce the changeover time drastically. Increased rigidity
for 13 and 15-inch reel holders minimizes feeder vibration thereby guaranteeing
stable tape feed.
• The newly designed rear cover for the D-axis table reduces the noise generated by
the D-axis feeders from 82 dB to 76 dB, and so improves the working environment.
• The Windows-based F4G (Fuji 4th Generation software) line management system
controls the production line with high efficiency. F4G features user-friendly
operation allowing even beginners to utilize it.
Note: The CP-642/CP-642(E) does not include F4G. The F4G software must be
purchased separately. See the F4G specifications document for details.
– 1 – CP-642(E) Specifications
2.0
• An expanded backup pin area has eliminated the restrictions on backup positions
that existed on the XY-table on previous models. Also, the CP-642/CP-642(E) easily
meets the requirements to load PC boards of 0.5 mm thickness.
• The new loading system employs servo motors to control the PCB lifter rather than
the air cylinders used on previous models.
This system allows the CP-642(E) to shorten the PCB loading and unloading time
(reduced from 5 to 4 sec) and control acceleration/deceleration for shock-free
placement.
– 2 – CP-642(E) Specifications
2.1
1. Outline