cp642规格书.pdf - 第9页
3.2 Board T ransport (1) Direction of Board Flow • Left to right – Standard • Right to left – Optional (2) Board Transport Height • 900 (+15, –5) mm Standard • 950 (+15, –5) mm Optional Vibration isolation pads may incre…
3. Machine Specifications
3.1 Basic Specifications
• Placing Speed 0.09 sec/chip under the following conditions
> XY-table travel distance : within 14.8 mm
(within 15.3 mm including
compensation)
> D-axis movement : None
> FQ-axis rotation angle : within 20 degrees
> PQ-axis rotation angle : 90° or -90°
> Cam speed : 100%
> 180° rotation placement : 0.13 sec
• Placing Accuracy ±0.1 mm (3 sigma) in XY-direction
> Fiducial mark reference
> Rotational error is translated into an XY-coordinate.
• Placing Reliability 99.99 % (After auto recovery)
• Part Dimensions 1005 to 19 x 20 mm (20 x 20 mm for J-lead parts)
Part height: maximum 6 mm
• Package Type 8, 12, 16, 24 and 32 mm tape
Reel diameter: 180 mm, 330 mm and 380 mm
• Maximum Feeder Number 140 feeders (using 8 mm tape feeders)
• Board Loading Time 4.0 sec (XY-table travel time is not included)
• Fiducial Mark Read Time Approximately 0.5 sec/mark
> 1.2 mm mark diameter. Time needed to move between
the marks and to compensate for mark appearance and
displacement is not included.
• Nozzle Indexing Time 1 pitch rotation: 0.09 sec
2 pitch rotation: 0.15 sec
3 pitch rotation: 0.18 sec
– 5 – CP-642(E) Specifications
2.1
3.2 Board Transport
(1) Direction of Board Flow
• Left to right – Standard
• Right to left – Optional
(2) Board Transport Height
• 900
(+15, –5)
mm Standard
• 950
(+15, –5)
mm Optional
Vibration isolation pads may increase the board transport height by 12 mm.
(3) Board Transport
• Conveyor belt system
• In-conveyor -> main conveyor (XY-table) -> out-conveyor
(4) Maximum Transport Weight
• 1 kg maximum (2 kg with optional roller guided conveyor)
(5) Conveyor Width Adjustment
• The width of the conveyors can be changed individually or jointly using the
adjustment handle and the front rail as a reference.
– 6 – CP-642(E) Specifications
1.0
3. Machine Specifications
3.3 PCB Requirements
(1) Board Size
• 356 mm (W) x 457 mm (L) maximum
• 50 mm (W) x 80 mm(L) minimum
• Thickness 0.5 mm – 4.0 mm
Note: Consult Fuji if board backup is required.
(2) Board Material
• Glass epoxy, composites, paper phenol, alumina, polyimide, etc.
(3) Board Restrictions
• Warpage: ±1.0 mm maximum
• Height of premounted parts: 6.0 mm maximum
• Height of premounted bottom side parts: 25.4 mm
– 7 – CP-642(E) Specifications
2.0
3. Machine Specifications