cp642规格书.pdf - 第16页
6. Parts Supply System 6.1 Parts Supply T able (D-axis) and T ape Feeders (1) Types of Components 140 types (using 70 x 2 tables with 8 mm feeders) (2) Placeable Components Components that comply with the packaging, feed…
5.2 Nozzle Arrangement
The standard arrangement of nozzles is either type A or B, as shown below. Other
arrangements made up of nozzles A ~ O are possible.
The nozzle types listed here are identified in the following table.
Notes: (1) Only a nozzle with a ø20 reflective disk or smaller can be attached on either
side of a nozzle with a 20 mm square reflective plate.
(2) Only a nozzle with ø16 reflective disk or smaller can be attached on either
side of a nozzle with a 22 mm square or 22 square (black) reflective plate.
1
2
3
4
5
6
R12-007
R12-010
R12-013
R20-025
R20-037
S20-050
1
2
3
4
5
6
R12-010
R12-013
R12-018
R20-025
R20-037
S20-050
Type A
Nozzle Types
Type B
A
B
C
D
E
R12-007
R12-010
R12-013
M12-013
R12-018
F
G
H
I
J
K
R16-025
R16-037
R20-025
M20-025
R20-037
S20-050
S22-050
B22-050
S22-070
B22-070
L
M
N
O
Position on Head
Type A
Type B
Type A and Type B Nozzle Arrangements
1
A
B
2
B
C
3
C
E
4
H
H
5
J
J
6
K
K
– 12 – CP-642(E) Specifications
1.0
5. Nozzle
6. Parts Supply System
6.1 Parts Supply Table (D-axis) and Tape Feeders
(1) Types of Components 140 types (using 70 x 2 tables with 8 mm feeders)
(2) Placeable Components Components that comply with the packaging, feed
pitch and parts height requirements as previously
outlined.
(3) Table Drive Method 2 motor/2 independent drive mechanisms.
(4) D-table Drive Modes May be selected from the following
• Device Change Mode
• Changeover Mode
• Joint Mode
(5) Feeder Pitch
Note: The expressions "left side" and "right side" refer to the feeder mounting positions when
viewed from the rear of the machine.
(6) Feeder Types (which can be placed at the ends of the device tables)
W8 W12
N/A
N/A
N/A
N/A
D1
D70
D71
D140
√
√
√
√
W16
N/A
N/A
N/A
N/A
W24
N/A
N/A
N/A
N/A
W32
N/A
N/A
N/A
N/A
W8
W12
W16
W24
W32
W8
1P
2P
2P
2P
2P
W12
2P
2P
2P
2P
3P
W16
2P
2P
2P
2P
3P
W24
2P
2P
2P
3P
3P
W32
2P
3P
3P
3P
3P
Left side
Right side
– 13 – CP-642(E) Specifications
1.0
– 14 – CP-642(E) Specifications
1.0
6. Parts Supply System
(7) Feeder Stands
• A feeder stand is a 3-tier shelf designed to accommodate unused or spare feeders.
Shelves can be selected from the following list and attached to the stand.
(8) List of CP642/CP642(E) Compatible Feeders
For 330 mm reel
WD-0804-1.0-330
WD-0804-1.3-330
WD-0804-1.8-330
WE-0804-1.0-330
WE-0804-1.3-330
WE-0804-1.8-330
WE-1204-2.5-330
WE-1208-2.5-330
WE-1212-2.5-330
WE-1604-3.7-330
WE-1608-3.7-330
WE-1612-3.7-330
WE-2404-5.0-330
WE-2408-5.0-330
WE-2412-5.0-330
WE-2416-5.0-330
WE-2424-5.0-330
WE-3212-7.0-330
WE-3216-7.0-330
WE-3224-7.0-330
For 380 mm reel
WE-1204-2.5-380
WE-1208-2.5-380
WE-1212-2.5-380
WE-1604-3.7-380
WE-1608-3.7-380
WE-1612-3.7-380
(12 mm Double feeding)
(12 mm Double feeding)
For 180 mm reel
WD-0802-0.7-180
WD-0804-1.0-180
WD-0804-1.3-180
WD-0804-1.8-180
WE-0802-0.7-180
WE-0804-1.0-180
WE-0804-1.3-180
WE-0804-1.8-180
WE-1204-2.5-180
WE-1208-2.5-180
WE-1212-2.5-180
Feeder Stand
Holds 8, 12 mm
Holds 16 mm
Holds 24 mm
Holds 32 mm
(3 Shelves/ Stand)
(accommodates 34 feeders)
(accommodates 27 feeders)
(accommodates 22 feeders)
(accommodates 19 feeders)