cp642规格书.pdf - 第18页
Notes: (1) Both 330 and 380 diameter reels can be mounted on reel holders. The feeding capacity is a maximum 10,000 parts at 4 mm/pitch and a maximum 5,000 parts at 8 mm/pitch. (2) A part is fed by a single stroke for a …
– 14 – CP-642(E) Specifications
1.0
6. Parts Supply System
(7) Feeder Stands
• A feeder stand is a 3-tier shelf designed to accommodate unused or spare feeders.
Shelves can be selected from the following list and attached to the stand.
(8) List of CP642/CP642(E) Compatible Feeders
For 330 mm reel
WD-0804-1.0-330
WD-0804-1.3-330
WD-0804-1.8-330
WE-0804-1.0-330
WE-0804-1.3-330
WE-0804-1.8-330
WE-1204-2.5-330
WE-1208-2.5-330
WE-1212-2.5-330
WE-1604-3.7-330
WE-1608-3.7-330
WE-1612-3.7-330
WE-2404-5.0-330
WE-2408-5.0-330
WE-2412-5.0-330
WE-2416-5.0-330
WE-2424-5.0-330
WE-3212-7.0-330
WE-3216-7.0-330
WE-3224-7.0-330
For 380 mm reel
WE-1204-2.5-380
WE-1208-2.5-380
WE-1212-2.5-380
WE-1604-3.7-380
WE-1608-3.7-380
WE-1612-3.7-380
(12 mm Double feeding)
(12 mm Double feeding)
For 180 mm reel
WD-0802-0.7-180
WD-0804-1.0-180
WD-0804-1.3-180
WD-0804-1.8-180
WE-0802-0.7-180
WE-0804-1.0-180
WE-0804-1.3-180
WE-0804-1.8-180
WE-1204-2.5-180
WE-1208-2.5-180
WE-1212-2.5-180
Feeder Stand
Holds 8, 12 mm
Holds 16 mm
Holds 24 mm
Holds 32 mm
(3 Shelves/ Stand)
(accommodates 34 feeders)
(accommodates 27 feeders)
(accommodates 22 feeders)
(accommodates 19 feeders)
Notes: (1) Both 330 and 380 diameter reels can be mounted on reel holders. The
feeding capacity is a maximum 10,000 parts at 4 mm/pitch and a maximum
5,000 parts at 8 mm/pitch.
(2) A part is fed by a single stroke for a pitch of 2, 4, 8, 12 and 16 mm, and by
multiple strokes for a pitch up to 24 mm.
(24 mm is the maximum length of tape which can be cut off.)
(3) 380 diameter reel holders are manufactured on demand.
(4) The reel's alphanumeric number includes the applicable nozzle size. The
size is the maximum nozzle diameter. Nozzles of smaller diameter can be
used on the feeder as well.
(5) All FCP-6 dedicated feeders are made of aluminum.
(6) The dimensions of the W8, 13-inch parts reel are shown below.
Feeders for the CP6 use a box-type reel holder, providing structural stability
which ensures repeated component pick-up accuracy.
– 15 – CP-642(E) Specifications
1.0
6. Parts Supply System
7. Vision System
7.1 Camera Unit (Parts Recognition)
The CP642/CP-642(E) is equipped with two cameras, each camera being adapted for
different uses; a high resolution small F.O.V. camera is used to acquire images of small
components such as 1005s and small SOTs, and a large F.O.V. camera is used for SOICs
and PLCCs. Also, frontlighting or backlighting can be selected according to the
configuration of the parts.
(1) Vision Controller
Attached inside the machine's base control box.
(2) Narrow View Camera
Part camera for backlight use
• 1005, 1608, 2125, 3216, SSMin, SMin, etc.
(3) Wide View Camera
The parts cameras can be switched from backlight to frontlight use. Frontlight use
is limited to J-lead parts.
• Backlight compatible parts: 19 x 20 mm maximum
• Frontlight compatible parts: 20 x 20 mm maximum J-lead parts
– 16 – CP-642(E) Specifications
1.0