SME_DB_Feeder_User_Guide(Eng_Ver1.5) (1).pdf - 第15页
Preface v Do not store the feeders in a location where vibration exists Do not keep tape feeders in a place subject to serious vibratio n. If the joints at which tape feeder co mponents are connected become loose, an e…
SM-Series SME DB Tape Feeder User's Manual
iv
Do not store feeders in a location where magnetism is generated
Do not keep tape feeders in a place where magnetism is generated. If the area from
which a part is picked up in the tape feeder is magnetized, a part feeding error may
occur.
Do not store feeders in a location where magnetism is generated
Do not store feeders in the place where there is the presence of oil and organic solvents
Do not keep tape feeders in a place where oil or organic solvent exists. The tape feeder
may be damaged or reel components may be damaged if stained with oil or organic
solvent or a defect may occur to a PCB.
Do not store feeders in the place where there is the presence of oil
Avoid collision
Exercise care so that the tape feeder does not collide with another tape feeder or other
materials. The tape feeder may be damaged, causing its performance to be reduced.
Avoid collision
Preface
v
Do not store the feeders in a location where vibration exists
Do not keep tape feeders in a place subject to serious vibration. If the joints at which
tape feeder components are connected become loose, an error may occur to the driving
module or electronic circuits.
Do not store the feeders in a location where vibration exists
Avoid dusty locations
Do not keep tape feeders in a place with lots of dust. If dust gets into the tape feeder, it
may not operate properly.
Avoid keeping feeders in dusty locations
SM-Series SME DB Tape Feeder User's Manual
vi
About Handling
Basic items to be observed with regard to the handling of the tape feeder are as follows.
Cautions to be exercised when transporting a tape feeder
Transporting a tape feeder holding its handle. Do not transport several tape feeders
with one hand. Otherwise, a tape feeder may drop causing damage to it or injury to the
user.
Do not disassemble a tape feeder.
It is prohibited for users who have not received specialized training to disassemble a
tape feeder. Only our CS engineer can do it. If a user who has not received specialized
training disassembles a tape feeder, it may not operate properly.
Do not disassemble