SME_DB_Feeder_User_Guide(Eng_Ver1.5) (1).pdf - 第35页
2-9 Operation of the Feeder 2.2. Installing the SME 12~88mm Feeder Tape 2.2.1. Opening Tape Guide Press the tape feeder locker in t he arrow direction by (1) hand and pull the (2) tape guide up to open it. Figure2.12 Ope…
2-8
SM-Series SME DB Tape Feeder User's Manual
Figure2.10 Fixed upper cover tape(8mm/W4P1 feeder)
2.1.6. Setting the Pickup Point
The SME tape feeder can be transferred to the pickup point (pickup position) indicated by
a triangular mark by pressing the forward and backward buttons on the operation panel
located on the handle.
Figure2.11 Setting the pickup point of the SME feeder
1: Forward Button
2: Backward Button
3: Pickup position
2-9
Operation of the Feeder
2.2. Installing the SME 12~88mm Feeder Tape
2.2.1. Opening Tape Guide
Press the tape feeder locker in the arrow direction by (1) hand and pull the (2) tape guide
up to open it.
Figure2.12 Opening the SME 12~88mm Tape Guide
Caution When installing a tape in the feeder, exercise care not to have a
finger jammed into the tape guide.
Do not pull the tape guide up excessively.
Install the tape in the feeder in the specified order without fail.
Since the SME 12~88mm tape feeder is heavy, be careful not to
drop it while transporting it.
Be sure to use a standard tape such as JIS or EIA for the feeder.
Use only the right size component reel tape for the feeder.
If the front part and locker of the tape guide are deformed, the
part pickup rate may be reduced. Therefore, exercise great care
when storing and using the feeder.
Caution Dismantling the feeder could cause damage or injury. If a
feeder malfunctions, please contact our CS company
or local agent.
2-10
SM-Series SME DB Tape Feeder User's Manual
2.2.2. Fixing the Tape Reel
The method to connect a reel to the 12~88mm tape feeder is as shown in the following
figure:
1) Pull the reel arm plate of the tape feeder in the arrow direction until it is secured.
2) Insert the reel into the center of the reel arm post of the reel arm plate.
3) Lift the reel arm plate up backward slightly to unfix the reel
arm plate. Then move the
reel arm plate down.
4) Secure the reel brake to the reel.