SME_DB_Feeder_User_Guide(Eng_Ver1.5) (1).pdf - 第6页
在线预览 SME_DB_Feeder_User_Guide(Eng_Ver1.5) (1).pdf PDF 文档。
Notice
Copyright
© Hanwha Precision Machinery Co., Ltd.
Limitations
Hanwha Precision Machinery Co., Ltd., owns the copyright to this manual. It is prohibited to
duplicate, distribute and reproduce or change this manual and the information therein, in whole or
in part, without official permission from Hanwha Precision Machinery Co., Ltd.
Limitation of Liability
Hanwha Precision Machinery Co., Ltd., exerted its best efforts to include the correct information in
this manual but will not guarantee the correctness of the information. Users shall take full
responsibility for the results of using this document. Hanwha Precision Machinery Co., Ltd., may
change the contents of this document without notice.
Contact Information
Please contact us regarding questions related to this manual and request manual data using the
'SUPPORT' menu on the our company website. ('SUPPORT' menu → 'Receiving VOC' menu)
Our Company Website Address: https://www.hanwhaprecisionmachinery.com
Hanwha Precision Machinery Co., Ltd.
E-mail: smtcs@hanwha.com
Warning Pack the machine using durable packing materials and covers to
ensure electrical protection before moving.
Operating the machine without taking proper safety measures or
in an inappropriate place may cause damage to the machine or
personal death or injury.
If the door switch is removed, since the machine will not stop
even though the door opens during operation, the user may be
injured. Do not remove the door switch. Do not attempt to remove
the door switch by making an arbitrary decision.
Do not attempt to modify the equipment without prior consent
from Hanwha Precision Machinery Co., Ltd., or repair it in a
manner not stated in this manual.
Hanwha Precision Machinery Co., Ltd.is not responsible for
problems caused by machine repairs performed in a manner not
mentioned in this manual, or any modifications carried out without
prior approval.
Be sure to turn off the power switch and then close the air-valve
before performing maintenance or repair of the machine. If these
steps are not followed, personal injury could occur.
Adjusting the sensor or taking measures against an error while
the machine in in the ‘READY’ state may cause a user to be
injured. Press the ‘EMG’ switch to release the ‘READY’ state and
perform sensor adjustment and take measures against the error
after pressing the ‘STOP’ button.
A system infected by a computer virus may make the machine
malfunction and cause damage.
We do not take responsibility for any damage to data due to an
infection by virus. Therefore, perform a virus check periodically to
prevent data from being infected.