SIPLACE D系列Servicemanual.pdf - 第95页
Service Work Replacing the Twin Head Hoses Placement H eads Servicemanual (internal version) SIPLACE D Series 95 X Disconnect the long hose (1) at the top. X Disconnect the short hose (2) from the rotary supply (1) . X R…
Service Work
Placement Heads Replacing the Twin Head Hoses
94 Servicemanual (internal version) SIPLACE D Series
X Carefully disconnect the flat ribbon cable plug
(1) .
X Loosen the screw (2), fastening the elbow (1) .
Service Work
Replacing the Twin Head Hoses Placement Heads
Servicemanual (internal version) SIPLACE D Series
95
X Disconnect the long hose (1) at the top.
X Disconnect the short hose (2) from the rotary
supply (1) .
X Replace the short hose at the elbow with a
new one.
This is 26 mm long.
NOTE:
X Fit the hoses approx. 4 - 5 mm onto
the respective connections.
X Fit the short hose for the elbow onto the rotary
supply.
Service Work
Placement Heads Replacing the Twin Head Hoses
96 Servicemanual (internal version) SIPLACE D Series
X Place the elbow into its holder.
X Fix the elbow loosely with the fastening screw
(1).
Carefully move the elbow, so that the screw
engages with the notch (2) .