00198171-02_Technical_Training_FSE_TX-Series_EN.pdf - 第15页

2 Machine Basic Overview 2.2 Machine Overview Technical Training FSE SIPLACE TX-Series 01/2018 15 Machine Switches T - Transport direction 1. Status lamp 2. E-Stop 3. Start / Stop button 4. Switch to dock / undock COT 5.…

100%1 / 168
2 Machine Basic Overview
2.2 Machine Overview
14 Technical Training FSE SIPLACE TX-Series 01/2018
TX micron Machine Specifications (excerpt)*
Specification details* Value
Machine configuration Two Gantries in dual sided machine
Available heads C&P20 M2 CPP M
Benchmark [cph]** Up to 78.000 cph Up to 48.000 cph
Accuracy ≥15µm** @ 3σ with C&P20 M2 and CPP M
Component range 0201 metric up to 27 mm x 27 mm x 8,5 mm
Board size Dual conveyor: 50 x 55 mm to 375 x 260 mm
Component supply Up to 80 x 8 mm tapes, JEDEC tray
Clean room Class 10000 / ISO 7 Standard
Class 1000 / ISO 6 Optional
Power consumption Typical: 1,9 kW including vacuum pump
Machine Dimensions 1,00m x 2,23m x 1,45m
*For detailed specification see the TX-Series User Manual or machine specification document
**Placement performance (depends on Head Machine configuration)
Accuracy Classes
Product TX2 micron TX2i micron TX2i micron 15 μm
Accuracy class 25/20 μm / 3σ 25/20 μm / 3σ 15 μm / 3σ (25/20 µm)
Head / camera
●
CPP M, type 30
(optional 45)
●
CP20M2, type 41
●
CPP M, type 30
(optional 45)
●
CP20M2, type 41
●
CPP M, type 45
●
CP20M2, type 41
Vacuum tool optional optional yes (standard)
Cyclic recalibra-
tion
X-fiducial bar X-fiducial bar X-fiducial bar
Y-fiducial bar
License required no no yes
Accuracy proof ACT plate standard ACT plate standard ACTplate standard +
ACTplate 15µm
NOTICE
Select accuracy class
For required components the accuracy class needs to be selected in SIPLACE Pro.
2.2 Machine Overview
General Overview
T - Transport direction
1. Location 1
2. Location 2
3. COT for location 2
2 Machine Basic Overview
2.2 Machine Overview
Technical Training FSE SIPLACE TX-Series 01/2018 15
Machine Switches
T - Transport direction
1. Status lamp
2. E-Stop
3. Start / Stop button
4. Switch to dock / undock COT
5. Main switch
Main Component Locations
T - Transport direction
1. Vacuum pump location
2. Gantry 1
3. Gantry 2
4. Switch Mode Power Supply Location 2
5. Pneumatic unit
6. SIPLACE LAN and transport interface con-
nections, power in
2 Machine Basic Overview
2.3 Overview main components
16 Technical Training FSE SIPLACE TX-Series 01/2018
2.3 Overview main components
Placement Heads
The following placement heads can be installed on TX machines:
C&P20 P Twin Head* C&P20 M2** (red handle)
CPP CPP M** (red handle)
*Twin Heads or stationary cameras are not supported on TX micron
**C&P20 M2 and CPP M only supported by TX micron
PCB Transport System
The following conveyor configurations are pos-
sible:
●
Standard: Dual Conveyor Fixed rail outer
●
Dual Conveyor Fixed rail left*
●
Dual Conveyor Fixed rail right*
●
Flexible Dual Conveyor Fixed rail left*
●
Flexible Dual Conveyor Fixed rail right*
*configurable