00198171-02_Technical_Training_FSE_TX-Series_EN.pdf - 第2页

All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violat…

Technical Training FSE

SIPLACE TX-Series

Edition 01/2018 EN

All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining

trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate

the rights of the owner.

We have reviewed the contents of this publication to ensure consistency with the hardware and software de-

scribed. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the informa-

tion in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.

ASM Assembly Systems GmbH & Co. KG

Rupert-Mayer-Strasse 44

81379 Munich

Germany

Item no.: 00198171-02

www.asm-smt.com Printed by ASM Assembly Systems

3Technical Training FSE SIPLACE TX-Series 01/2018

Table of Contents

1 Machine Safety.. 7

1.1 Machine Safety.. 7

1.2 Warning Labels - General.. 8

1.3 High temperatures related to C&P20 A/M/P/M2 Head, X-Feeder 8mm and Smart-

Feeder 4mmX / 8mmX.. 9

1.4 High temperature related to MHCU.. 9

1.5 ESD Guidelines.. 9

1.6 Excercise: Machine Safety.. 10

2 Machine Basic Overview.. 13

2.1 Introduction.. 13

2.2 Machine Overview.. 14

2.3 Overview main components.. 16

2.4 Machine Configuration.. 19

2.5 Special Features.. 21

2.6 Configuration Help.. 22

2.7 Excercise: TX Machine Basic Overview.. 22

2.8 Featchers to Achieve high Accuracy with the TX micron.. 25

3 Setting Up the Machine.. 27

3.1 Setting up the TX Machine.. 27

3.2 Setting up the TX Machine - Calibrations.. 29

3.3 Setting up the TX Machine – Tools.. 31

3.4 Excercise: Setting up the machine.. 31

4 Gantry System.. 35

4.1 Overview.. 35

4.2 Reference Run.. 36

4.3 Calibration after Repair and Adjustment.. 39

4.3.1 Explanation of main Gantry Calibrations.. 39

4.3.2 Conducting Calibrations.. 40

4.4 PCBs.. 41

4.5 Control and Communication Overview.. 42

4.5.1 Gantry System - Travel Ranges and Speed Monitoring.. 44

4.6 Analyze.. 45

4.7 Main Parts Exchange / Setting / Calibration.. 45

4.8 Gantry System and Base Machine - Overview Maintenance.. 45

4.9 Excercise: TX Gantry System.. 46

5 Component Supply.. 49

5.1 Change Over Table (COT).. 49

5.1.1 Location.. 49

5.1.2 Overview COT.. 49

5.1.3 COT Feeder Configuration.. 50

5.1.4 Height Adjustment.. 50