00198171-02_Technical_Training_FSE_TX-Series_EN.pdf - 第157页
10 JTF-ML 10.1 JTF (JEDEC Tray Feeder) - General Overview Technical Training FSE SIPLACE TX-Series 01/2018 157 10 JTF-ML 10.1 JTF (JEDEC Tray Feeder) - General Overview The JTF (JEDEC Tray Feeder) is an option for feedin…
9 Station Software Overviews
Room for Your Sketches and Notes
156 Technical Training FSE SIPLACE TX-Series 01/2018
10 JTF-ML
10.1 JTF (JEDEC Tray Feeder) - General Overview
Technical Training FSE SIPLACE TX-Series 01/2018 157
10 JTF-ML
10.1 JTF (JEDEC Tray Feeder) - General Overview
The JTF (JEDEC Tray Feeder) is an option for feeding tray package component.
Tray feeder Unit
●
Only at location
●
In combination with CPP M head in high position.
●
Magazine for 14 and 18 trays available
●
Connection to machine from the side
●
28 feeder slots left next to tray unit
●
An output extension conveyor will be offered with a length 600 mm
●
A special changeover table is required.
●
The tray unit can be removed easily. When removing only the tray unit and not the
changeover table the free space can be used for all non-tape feeders as LDU-X or Glue-
Feeder. If the full feeder capacity shall be used for tape feeder also table and tape empty
guidance need to be exchanged.
General Features
●
Magazines for 18 thin JEDEC Standard Trays and 14 JEDEC Thick Trays for higher compon-
ents.
●
CPU controlled.
A - Backside (inside)
B - Front side (outside)
1. Tray clamp (X&Y)
2. Conveyor
3. Return pusher
4. Feeder base
5. Connection cable and hose
6. Operation panel
7. Operation cover
10.2 JTF (JEDEC Tray Feeder) - Technical Data
JTF Specification extract
Description Data
Electrical 24 VDC +/- 10% - 3 A (Peak), 0,4 [A] Standby,
1 [A] during a tray exchange
Communication serial RS-232, ASCII Protocol
Pneumatic 5.2 – 9 bar (75-130 PSI), < 28.3 Liter/Minute
JEDEC Tray Capacity 18 thin JEDEC Standard Trays
14 thick JEDEC Trays
Standard JEDEC Tray Type JEDEC Standard No. 95-1, IEC 60286-5
Tray Exchange (Slow) for sensitive components About 30 – 50% slower compared to fast
Total weight of total trays 2.7 kg total
Max weight per tray 550 g +/- 10%
10 JTF-ML
10.3 JTF (JEDEC Tray Feeder) - Operation
158 Technical Training FSE SIPLACE TX-Series 01/2018
Description Data
Maximum force on tray 2 N
Components size vs. Pocket size JEDEC Standard No. 95-1
For the full specification see the user manual delivered with your JTF.
Tray Specification extract
Tray width 135.9 mm + 0.25/ -0.13 mm
Tray length 322.6 + 0.25/ -0.13 mm
Thickness of thin trays 7.62 mm +/- 0.2 mm
Thickness of thick trays 12.19 mm +/- 0.2 mm
Max weight of tray 550 g
Max tray in the magazine 2.7 kg, 150 grams per tray for 18 trays
Warpage** Less than 0.8 mm over the entire surface
** Important is the flatness/ warpage 0.8 mm shall not exceed. Tray with larger warpage will lead to
jamming of the tray. Also important is the balance of heavy loaded trays. The center of gravity
needs to be in the center of the tray.
10.3 JTF (JEDEC Tray Feeder) - Operation
10.3.1 Overview
1. LED lamp green
2. LED lamp red
3. LED lamp yellow
4. LED lamp blue
5. Index 2
6. Elevator button
7. Inhibit button
8. Reset button
9. Stop button
10. Index 1