AOI_RS_v85_en.pdf - 第49页
Chapter 2 Repair Station Main Progr am AOI Repair Station 45 enter a value to it (attention: [Error Code] can not be identical to any other saved data, [Error Code], [System Define], [RKEY] and [User Define] field m ust …
Chapter 2 Repair Station Main Program
AOI Repair Station
44
7.1 Error Type Define
You can adjust the color or text of the [Error Area] in Confirm work
frame.
Procedure
Step1. Press[QUERY]
Step2. Edit content
Error Code－The system-defined error code.
SYSTEM Define－The system-defined error name. Do not
modify.
USER DEFINE－May change to ERROR CODE of user
side
RKEY－is the Hotkey of the ERROR CODE.
COLOR－Double click on this field then you can define
the color of every error button.
Priority－Set the priority of ERROR CODE. When there
are more than one defect for a component it shows .It’s only
used in special cases, no setting is necessary
Client Code－User can define the error code at this field.
It’s because clients may want the error code to be the same
with their SFC system; using the field has to select the
corresponding SFC type.
Client Err Name－User can define the error name at this
field. It’s because clients may want the error name to be the
same with their SFC system; using the field has to select the
corresponding SFC type.
Press [+] at the bottom of screen to add other Codes, then
Chapter 2 Repair Station Main Program
AOI Repair Station
45
enter a value to it (attention: [Error Code] can not be
identical to any other saved data, [Error Code], [System
Define], [RKEY] and [User Define] field must enter a value,
others may enter values that are the same as other data
Step3. Press [Save] after the modification.
7.2 Station Define
You can query or modify the station ID in this page. SPC program
define station according to this table.
7.3 Schedule Define
You can define the schedule of operator here.
Chapter 2 Repair Station Main Program
AOI Repair Station
46
7.4 Main Tree Define
You can define the texts that you want to display on the Tree Diagram.
7.5 Status Setting
Modify the displayed name of the board status. In this setting, there
is only “Status Name” field could be modified.